- Atlas
- Business, Management & Finance
- Quality Management
Quality Management
Quality management is the work of making sure that what an organization produces—a car, a drug, a bank loan, a hospital stay—actually meets the standard it is supposed to meet, and of improving that standard over time.
9 frameworks, from 1900 to today · Operations · Business, Management & Finance
- Inspection-based quality control 1900-1940
- Statistical process control 1924-Present
- Toyota production system 1950-Present
- Company-wide quality control 1960-1990
- Structured quality problem-solving methods 1960-Present
- Total Quality Management 1980-Present
- Six Sigma 1986-Present
- Quality award and certification models 1987-Present
- Lean Six Sigma 2000-Present
Overview
Quality management is the work of making sure that what an organization produces—a car, a drug, a bank loan, a hospital stay—actually meets the standard it is supposed to meet, and of improving that standard over time1. What makes it a field rather than a habit of care is a shift in how quality is achieved: from catching defects after the fact to preventing them, and from policing by inspectors to building quality into the process and into everyone's job. That shift took roughly a century, and it is the spine of the history below.
Inspection: quality as a final gate
For most of industrial history, quality was checked, not made. In the factories of the nineteenth and early twentieth centuries, and especially in the mass-production systems that followed Frederick Winslow Taylor's The Principles of Scientific Management (1911), work was broken into simple, standardized tasks and output was inspected at the end. An inspector compared finished goods against a specification and rejected the failures. This "inspection-based quality control" had a clear logic: it protected the customer from bad product and gave management a count of defects. Its limits were equally clear. Inspection is a gate at the end of the line, so defects have already consumed labor and material by the time they are found. It treats quality as a separate department's job. And it cannot distinguish a process that is drifting out of control from one that is merely unlucky—it sees individual bad items, not the pattern behind them.
Statistical quality control: seeing the process behind the product
The decisive break came from statistics. In the 1920s at Bell Telephone Laboratories, Walter Shewhart was studying how to make telephone equipment reliable, and he reframed the problem: variation is inherent in every process, and the manager's task is to separate common-cause variation (the ordinary noise of a stable process) from special-cause variation (a signal that something has changed)2. His control chart, introduced in a 1924 memorandum and elaborated in Economic Control of Quality of Manufactured Product (1931), plots a measured characteristic over time against statistically derived limits. Points inside the limits indicate a process behaving predictably; points outside signal a disturbance worth investigating. This was the birth of statistical quality control (SQC), and with it statistical process control (SPC), the ongoing use of such charts to keep a process in a state of statistical control3.
Shewhart's colleague W. Edwards Deming carried the idea further and, crucially, abroad. During the Second World War, the U.S. War Department pushed statistical methods into munitions plants through training programs and standards, and the American Society for Quality Control (founded 1946, now the American Society for Quality) grew out of that wartime effort. Sampling inspection, developed in the same Bell Labs milieu and systematized in military standards such as MIL-STD-105, let producers accept or reject lots from a sample rather than testing everything—a practical answer to the cost of full inspection4. The idea that a process could be kept capable rather than merely judged was now established, but in most American firms it remained a specialist tool in the quality department.
Japan: quality becomes everyone's job
The transformation of quality from a technical specialty into a management system happened largely in postwar Japan. Deming was invited to lecture there in 1950, and Joseph Juran followed in 1954; both taught statistical thinking and, more importantly, that quality was a management responsibility reaching from top executives down. Japanese firms, rebuilding with scarce resources and a reputation for shoddy goods to overcome, absorbed the message and went further than their teachers.
The result is usually called company-wide quality control (CWQC), or total quality control (TQC) in the Japanese usage. Its distinguishing features were that quality became an organization-wide effort rather than a departmental one, that it extended upstream to suppliers and downstream to the customer, and that it enlisted the people doing the work. Quality circles—small groups of workers who meet to identify and solve quality problems in their own area—spread widely in Japan from the early 1960s, and the Union of Japanese Scientists and Engineers (JUSE) institutionalized training and promotion5. Kaoru Ishikawa's cause-and-effect ("fishbone") diagram and his emphasis on the "seven basic tools" of quality gave shop-floor teams a shared vocabulary. Genichi Taguchi contributed a distinctive view of quality as the loss a product imposes on society from the moment it is shipped, which reframed the goal as minimizing deviation from target rather than merely meeting a tolerance.
The practical payoff was visible in manufacturing performance, and by the 1970s Japanese firms—Toyota most famously—were competing on quality in markets where their products had once been dismissed. Toyota's production system, developed by Taiichi Ohno and colleagues from the late 1940s onward, embedded quality in the flow of work: jidoka, stopping the line when a problem appears so it is fixed at its source, and poka-yoke, mistake-proofing devices that make errors hard to commit. This is the lineage of what later became known as lean production—a term popularized by the MIT International Motor Vehicle Program's The Machine That Changed the World (1990)—in which quality, waste elimination, and continuous improvement are one system rather than separate programs.
Total Quality Management: quality as strategy
The Japanese challenge forced Western managers to rethink, and the 1980s produced the synthesis known as Total Quality Management (TQM)6. TQM generalized the Japanese lessons into a management philosophy: leadership commitment, customer focus, employee involvement, process orientation, fact-based decision-making, and continuous improvement, often organized around Deming's Plan-Do-Study-Act cycle and his "fourteen points" for management. Deming's Out of the Crisis (1986) and Juran's Quality Control Handbook (first edition 1951) became canonical texts. The message was that most quality problems are built into systems by management, not caused by careless workers—so blaming individuals was both unjust and ineffective.
TQM's spread was accelerated by institutional frameworks. In 1987 the U.S. Congress established the Malcolm Baldrige National Quality Award, which scored organizations against criteria for leadership, process management, and results, and became a template for self-assessment. In the same year the International Organization for Standardization issued the ISO 9000 series, standards for a quality management system that a firm could be certified against by an external auditor. These award and certification frameworks did two things: they made quality management auditable and comparable across organizations, and they created a large consulting and auditing industry. They also drew criticism—that certification could become a paperwork exercise decoupled from real improvement—a tension that persists.
Alongside the management philosophy grew a toolkit of structured quality methods for solving problems systematically: the Seven Basic Tools (check sheets, Pareto charts, cause-and-effect diagrams, and so on), the Seven Management and Planning Tools, Quality Function Deployment (developed in Japan in the late 1960s and 1970s to translate customer requirements into design specifications), Failure Mode and Effects Analysis (FMEA), and later Six Sigma. Six Sigma, launched at Motorola in the 1980s and famously deployed at General Electric under Jack Welch in the 1990s, packaged statistical process control with a project-based improvement structure and a belt system of trained practitioners (Green Belts, Black Belts). It gave SQC a corporate career ladder and a language executives understood: defects per million opportunities.
Lean, Six Sigma, and the present
The last decades have seen convergence and, in places, reaction. Lean production and Six Sigma, once rivals, were frequently combined as "Lean Six Sigma," pairing lean's focus on flow and waste with Six Sigma's statistical rigor. The Toyota-derived emphasis on continuous improvement (kaizen) and respect for people remained influential far beyond manufacturing, migrating into healthcare, services, and software—where agile and DevOps practices absorbed ideas about stopping to fix problems and building quality in rather than testing at the end.
At the same time, the field's center of gravity has broadened. Quality management now routinely includes service quality, where the "product" is an experience and measurement is harder; supplier quality, extending control across the supply chain; and the quality of software and data. The older debates remain live. How much can be standardized and audited (ISO 9000, Baldrige) versus how much depends on culture and leadership? Do statistical tools and belt programs produce durable improvement or episodic projects? And the founding insight—that variation is the enemy and that stable processes are the precondition for improvement—still underlies everything from a hospital's infection-control charts to a factory's control room. What began as a final inspection gate is now, in principle, a way of designing and running the whole organization.
References
- Quality management, Wikipedia
- Control chart (History), Wikipedia
- Statistical process control, Wikipedia
- Acceptance sampling (History), Wikipedia
- Quality circle (introduction, History), Wikipedia
- Total quality management (introduction, History), Wikipedia
The frameworks of Quality Management
Each framework is a way of working the field has used: when it held, and the question it answers.
- 1900-1940
Inspection-based quality control
How do we catch defective products before they reach the customer?
- 1924-Present
Statistical process control
How can we tell whether a process is behaving predictably?
- 1950-Present
- 1960-1990
Company-wide quality control
How do we make quality everyone's job across the company?
- 1960-Present
Structured quality problem-solving methods
What systematic steps solve a quality problem?
- 1980-Present
Total Quality Management
How should management run an organization around quality?
- 1986-Present
- 1987-Present
Quality award and certification models
How can an organization's quality be assessed and certified?
- 2000-Present
Lean Six Sigma
How do we combine speed and statistical rigor to improve?
How the ideas connect
Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.
Statistical process control grew out of Inspection-based quality control
Shewhart at Bell Labs reframed the inspection problem by treating variation statistically, introducing the control chart in a 1924 memorandum and in Economic Control of Quality of Manufactured Product (1931). SQC replaced end-of-line judging of individual items with monitoring of the process that produced them.
Carried by Walter Shewhart; Economic Control of Quality of Manufactured Product (1931).
Company-wide quality control influenced by Statistical process control
Deming (1950) and Juran (1954) brought statistical quality control and management responsibility for quality to Japan, where firms broadened it into company-wide quality control. Japanese TQC kept SQC tools as its technical core while extending them organization-wide.
Carried by W. Edwards Deming; Joseph Juran.
Six Sigma influenced by Statistical process control
Six Sigma, launched at Motorola in the 1980s, packaged statistical process control with a project structure and belt training. Its defects-per-million-opportunities metric and DMAIC steps rest directly on SPC's statistical measurement of process variation.
Carried by Motorola.
Total Quality Management grew out of Company-wide quality control
Western managers, facing Japanese competition, generalized Japanese company-wide quality control and TQC into Total Quality Management in the 1980s. TQM took over CWQC's organization-wide scope, customer and supplier orientation, and employee involvement as a management philosophy.
Carried by W. Edwards Deming; Out of the Crisis (1986).
Quality award and certification models grew out of Total Quality Management
The Malcolm Baldrige National Quality Award (1987) and the ISO 9000 series (1987) codified TQM principles into assessable criteria and certifiable management-system standards. They turned TQM's leadership, process and results emphases into auditable templates.
Carried by Malcolm Baldrige National Quality Award (1987); ISO 9000 (1987).
Lean Six Sigma grew out of Six Sigma
Lean Six Sigma combined Six Sigma's statistical toolkit, belt structure and DMAIC project method with lean's flow and waste focus. It grew directly out of Six Sigma as practitioners merged the two programs.
Toyota production system influenced by Statistical process control
Deming's 1950 lectures in Japan carried Shewhart's statistical thinking and control-chart methods to Japanese industry, where Toyota's engineers absorbed them into production practice. Jidoka and line-stop discipline built on the idea of detecting when a process departs from control.
Carried by W. Edwards Deming.
Lean Six Sigma influenced by Toyota production system
Lean production, derived from the Toyota production system and popularized by The Machine That Changed the World (1990), supplied Lean Six Sigma's focus on flow, waste elimination and kaizen. Lean Six Sigma paired these with statistical rigor.
Carried by The Machine That Changed the World (1990).
Six Sigma influenced by Structured quality problem-solving methods
Six Sigma's DMAIC structure drew on the earlier tradition of structured quality problem-solving methods such as the seven basic tools, FMEA and QFD. It formalized these into a staged, project-based improvement sequence.
Six Sigma grew out of Total Quality Management
Six Sigma grew out of the TQM era's emphasis on process improvement, customer focus and fact-based decisions, recasting them into a project-based, metric-driven program. Motorola and later General Electric framed it as a disciplined extension of total quality practice.
Carried by Motorola; Jack Welch.
Beyond the field
Where Quality Management's ideas came from in other fields, and what they led to there: the strongest 12 of 73 links.
Inspection-based quality control replaced by Statistical process control in Operations
Shewhart's control charts replaced inspection-based quality control by shifting from sorting out defective output after the fact to monitoring and stabilizing the process itself.
Carried by Walter A. Shewhart; Economic Control of Quality of Manufactured Product (1931).
Inspection-based quality control replaced by Statistical process control in Industrial Engineering
Shewhart's statistical process control replaced inspection-based quality control, shifting from detecting defects after production to controlling variation in the process itself.
Carried by Walter A. Shewhart.
Inspection-based quality control replaced by Statistical process control in Manufacturing Engineering
Statistical process control replaced inspection-based quality control as the working view: Shewhart's charts shifted quality assurance from sorting out defective output to controlling the process that produced it. Inspection remained as a residual practice within the newer regime.
Carried by Walter A. Shewhart; Economic Control of Quality of Manufactured Product (1931).
Inspection-based quality control replaced by Statistical Process Control in Quality Improvement
Inspection-based quality control, which relied on sorting out defective product after manufacture, was displaced by Shewhart's statistical control charts, which shifted attention to controlling and diagnosing the process itself. The later SPC defined itself against end-of-line inspection.
Carried by Walter A. Shewhart; Economic Control of Quality of Manufactured Product (1931).
Inspection-based quality control replaced by Statistical process control in Mechanical Engineering
Shewhart's control charts replaced inspection-based quality control by shifting from sorting finished goods to controlling the process statistically.
Carried by Walter A. Shewhart.
Inspection-based quality control replaced by Statistical process control in Production Systems
Inspection-based quality control, which sorted good from bad output after production, was replaced as the working view by Shewhart's statistical control charts, which monitored variation during production.
Carried by Walter A. Shewhart; Economic Control of Quality of Manufactured Product (1931).
Inspection-based quality control replaced by Statistical process control in Quality Engineering
Shewhart's control charts at Bell Labs replaced full inspection-and-sort with statistical monitoring of the process itself, keeping inspection only as a special case. Inspection-based quality control was the working view SPC displaced.
Carried by Walter A. Shewhart.
Statistical process control influenced Six Sigma in Quality Engineering
Six Sigma built directly on statistical process control, using control charts, process capability indices and variation reduction as its core tools; Motorola's programme formalised these SPC techniques into the DMAIC structure.
Carried by Motorola.
Statistical process control influenced Six Sigma in Quality Improvement
Statistical process control, developed by Walter Shewhart and taught by W. Edwards Deming, is the methodological core of Six Sigma's DMAIC measurement and control phases. Six Sigma's control charts and capability indices are direct descendants of SPC.
Carried by Walter A. Shewhart; W. Edwards Deming.
Statistical process control led to Multivariate Statistical Process Monitoring in Quality Engineering
Multivariate SPC in quality management is the multivariate generalization of Shewhart control charts, using Hotelling's T-squared and related statistics. It descends directly from the SPC framework.
Carried by Harold Hotelling.
Statistical process control replaced Inspection-based quality control in Quality Engineering
Shewhart's control charts and Dodge-Romig sampling replaced 100% inspection and sorting as the working method of quality control, keeping inspection only as a sampling step. Statistical process control defined itself as the alternative to inspection-based control.
Carried by Walter A. Shewhart; Economic Control of Quality of Manufactured Product (1931).
Toyota production system led to Lean manufacturing in Management
Lean manufacturing was formulated by Womack, Jones and Roos in The Machine That Changed the World (1990) as a generalisation and naming of the Toyota production system, which Ohno and Toyota had built from the 1950s.
Carried by The Machine That Changed the World (1990); Taiichi Ohno.

Quality Management is a planet in Nousfarer
Its city has a tower for each of these 9 frameworks. Land, walk in, and climb one concept at a time.
Land on Quality ManagementRelated fields
Fields its ideas are linked to
- Quality Engineering 19 links
- Operations 8 links
- Production Systems 6 links
- Management 6 links
- Industrial Engineering 5 links
- Food Quality 4 links
- Manufacturing Engineering 4 links
- Quality Improvement 4 links
- Construction Materials 3 links
- Performance Management 3 links
- Mechanical Engineering 3 links
- Procurement 2 links
More in Operations
- Logistics
- Operations
- Operations Strategy
- Procurement
- Production Planning And Control
- Project Management
- Service Operations
- Supply Chain Management
See where Quality Management sits on the Map of Human Knowledge