- Atlas
- Engineering
- Robot Kinematics Dynamics
Robot Kinematics Dynamics
Robot kinematics and dynamics is the part of robotics that describes how a machine's body moves and why.
12 frameworks, from 1850 to today · Robotics · Engineering
- Kinematic geometry of mechanisms 1850-Present
- Denavit–Hartenberg parameters 1955-Present
- Lagrangian mechanics 1960-Present
- Closed-form inverse kinematics 1968-Present
- Homogeneous transformation and Jacobian formalism 1970-Present
- Numerical inverse kinematics 1970-Present
- Recursive Newton–Euler dynamics 1975-Present
- Computed-torque control 1980-Present
- Screw theory 1980-Present
- Parallel manipulator 1985-Present
- Underactuation 1985-Present
- Computational and data-driven kinematics and dynamics 2000-Present
Overview
Robot kinematics and dynamics is the part of robotics that describes how a machine's body moves and why1. Kinematics deals with geometry and motion alone: where the end of an arm is when its joints sit at given angles, how fast it moves, and what joint motions produce a desired motion of the hand1. Dynamics adds force and mass: what torques the motors must supply to make that motion happen, and how the arm responds when it pushes against something. Everything a robot does physically—welding a car body, picking a part off a conveyor, walking across uneven ground—rests on these two bodies of theory. Their history is the story of how engineers learned to write down a machine's geometry and physics in forms a computer can use, and then to compute them fast enough to control a real arm in real time.
Linkages, geometry, and the mechanical heritage
The kinematic study of mechanisms is older than robotics. Nineteenth-century machine theory—associated with figures such as Franz Reuleaux in Germany—catalogued linkages and their motions as a branch of mechanical engineering, analysing how bars, sliders, and gears constrain one another's movement. The vocabulary of this tradition, including the idea of a kinematic chain and the classification of joints by the degrees of freedom they allow, passed directly into robotics when programmable arms appeared. A robot arm is, in this sense, a linkage whose joints are driven by motors and whose configuration is computed rather than set by hand.
The industrial robot of the early 1960s—Unimation's Unimate, installed at General Motors in 1961—was a serial chain of revolute joints, and its programming was essentially teach-and-playback: a human moved the arm through the motions and the machine repeated them. Making such machines do anything more flexible required a mathematical description of the arm's geometry, and that is where the modern subfield begins.
Representing pose: homogeneous transformations and the Jacobian
The first foundational tool was a compact way to describe where a rigid body sits in space. A homogeneous transformation is a 4×4 matrix that combines a rotation and a translation into a single multiplication, so that a chain of links can be described by multiplying matrices together. The convention was formalised for robotics in the 1950s and 1960s, notably in the work of Jacques Denavit and Richard Hartenberg, whose 1955 paper introduced the parameter convention—four numbers per joint—that is still called the Denavit–Hartenberg parameters. With it, the position and orientation of a robot's hand follows from multiplying one matrix per joint.
The companion tool is the Jacobian, a matrix of partial derivatives that relates joint velocities to the velocity of the hand12. It answers the question "if I turn this joint a little, how does the tool move?" and it also exposes singularities—configurations where the arm loses a direction of motion and the Jacobian becomes non-invertible1. The Jacobian became the workhorse of both analysis and control: it converts forces at the hand into torques at the joints, and it underlies the resolved-rate control schemes of the 1970s and 1980s, in which a desired Cartesian velocity is mapped back to joint velocities.
Inverse kinematics: from closed forms to general solvers
Forward kinematics—joint angles to hand pose—is straightforward matrix multiplication13. The hard problem is the inverse kinematics problem: given a desired hand pose, what joint angles achieve it14? For the six-joint arms that dominated industry, closed-form solutions were derived by exploiting geometry5. The classic result is the Pieper solution (from a 1968 Stanford dissertation by D. L. Pieper), which shows that a six-degree-of-freedom arm with three consecutive axes intersecting has a closed-form inverse solution. This structured the design of industrial arms for decades: build the wrist so that its three axes meet at a point, and the inverse problem splits into a position part and an orientation part, each solvable by hand.
Not every arm has such a structure, and closed forms do not exist in general. The alternative is numerical solution—iterative methods that start from a guess and converge on a pose, often using the Jacobian and its inverse or pseudo-inverse. These methods handle arbitrary geometries but can fail near singularities, converge to the wrong branch, or be slow. The tension between closed-form elegance and numerical generality runs through the whole history of the field.
Dynamics: Lagrangian and Newton–Euler formulations
Kinematics says where the arm can go; dynamics says what it costs to get there. Two formulations dominate. The Lagrangian approach, built on energies, derives equations of motion from kinetic and potential energy and yields the standard form in which the joint torques equal inertia times acceleration plus Coriolis and centrifugal terms plus gravity. The Newton–Euler approach, built on forces and moments, works link by link: propagate velocities and accelerations outward from the base, then propagate forces and torques inward from the tool. The two are mathematically equivalent, and the recursive Newton–Euler algorithm, developed in the late 1970s and early 1980s, computes the dynamics in time proportional to the number of joints—a decisive practical advantage over the naive Lagrangian expansion, whose cost grows with the cube of the joint count.
The recursive formulation made real-time dynamic control feasible, and it remains the backbone of modern simulation and control software. The computed-torque control law, which uses the inverse dynamics model to cancel the arm's nonlinearities and reduce the problem to a set of decoupled linear systems, became the canonical demonstration that a good dynamic model buys good control. It is exact only when the model is exact, and its sensitivity to modelling error motivated later adaptive and robust variants.
Screw theory and the product of exponentials
A parallel tradition describes motion using screw theory, in which any rigid motion is a rotation about and translation along a single axis—a screw6. The mathematics goes back to the nineteenth century, to Robert Ball's A Treatise on the Theory of Screws (1876), and was brought into robotics in the 1980s, most influentially by Roger Brockett and then by Richard Murray, Zexiang Li, and S. Shankar Sastry, whose 1994 textbook A Mathematical Introduction to Robotic Manipulation made the product of exponentials formula standard. In this formulation, the forward kinematics of a serial chain is a product of matrix exponentials, one per joint, each built from a screw axis. The approach avoids the bookkeeping of link frames, handles singularities more gracefully, and extends naturally to the Jacobian and to dynamics. It coexists with the Denavit–Hartenberg tradition rather than replacing it; many modern texts teach both.
Parallel mechanisms and closed chains
Serial arms are open chains. Parallel mechanisms close the chain: several legs connect a moving platform to a fixed base, as in the Stewart platform, a six-legged device proposed by D. Stewart in 1965 for flight simulation and later widely used in motion platforms and precision positioning. Closed chains offer high stiffness and load capacity but make kinematics harder, because the constraint equations of all legs must hold simultaneously. The inverse kinematics of a parallel mechanism is often easier than its forward kinematics—the reverse of the serial case—and the field developed its own body of theory for workspace analysis, singularities, and stiffness1. Parallel kinematics became a recognised research area in the 1980s and 1990s, with applications in machine tools and haptic devices.
Floating bases and underactuated systems
Until the 1980s, most theory assumed the robot's base was bolted to the ground. Legged robots and space manipulators break that assumption: their base moves, and the dynamics must account for it. Floating-base dynamics treats the base as an unactuated body coupled to the limbs, which introduces momentum conservation as a constraint and makes control substantially harder. The same mathematics describes underactuated systems—machines with fewer actuators than degrees of freedom—including walking robots, which must exploit passive dynamics and foot contact rather than command every joint. Research on legged locomotion from the 1980s onward, including the Raibert hoppers and later bipeds, drove this area, and it remains central to modern humanoid and space robotics.
The numerical and data-driven turn
The most recent shift is computational. Where closed-form solutions once defined good design, modern practice increasingly relies on numerical optimisation and, more recently, on learned models. Numerical inverse kinematics solvers, trajectory optimisation, and physics engines that integrate the equations of motion at high speed are now standard tools. Machine learning has entered the field as a way to approximate inverse kinematics, dynamics, and contact models from data—useful where analytical models are incomplete, as with flexible objects or complex contact. These methods inherit the classical formulations: a learned dynamics model is still trained against the same equations of motion, and a learned inverse-kinematics network is still judged by the same pose errors.
The field today
Contemporary robot kinematics and dynamics is a layered discipline. The homogeneous transformation and the Jacobian remain the universal language; Denavit–Hartenberg parameters and screw-based products of exponentials are both taught and used; recursive Newton–Euler algorithms underpin real-time control and simulation; and parallel, floating-base, and underactuated formulations extend the classical results to new machine types. The open questions are practical and hard: how to model contact and friction reliably, how to compute dynamics fast enough for high-degree-of-freedom and soft machines, how to guarantee that numerical solvers find the right solution, and how far learned models can substitute for analytical ones without losing the guarantees that made the classical theory useful in the first place.
References
- Robot kinematics (introduction, Kinematic equations, Robot Jacobian, Velocity kinematics, Inverse kinematics), Wikipedia
- Jacobian matrix and determinant, Wikipedia
- Forward kinematics, Wikipedia
- Inverse kinematics, Wikipedia
- 321 kinematic structure, Wikipedia
- Screw theory, Wikipedia
The frameworks of Robot Kinematics Dynamics
Each framework is a way of working the field has used: when it held, and the question it answers.
- 1850-Present
Kinematic geometry of mechanisms
How do linked bodies constrain each other's motion?
- 1960-Present
- 1968-Present
Closed-form inverse kinematics
What joint angles place the hand at a target?
- 1970-Present
Homogeneous transformation and Jacobian formalism
How does joint motion map to hand motion?
- 1970-Present
Numerical inverse kinematics
How can a target pose be found by iteration?
- 1975-Present
Recursive Newton–Euler dynamics
How can required torques be computed quickly?
- 1980-Present
- 1980-Present
- 1985-Present
- 1985-Present
- 2000-Present
Computational and data-driven kinematics and dynamics
Can motion be computed or learned from data?
How the ideas connect
Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.
Homogeneous transformation and Jacobian formalism influenced by Denavit–Hartenberg parameters
The homogeneous transformation convention formalised by Denavit and Hartenberg became the standard description of pose for serial chains. Later Jacobian and resolved-rate formulations built directly on that 4x4 matrix chain description.
Carried by Jacques Denavit; Richard Hartenberg.
Computed-torque control grew out of Recursive Newton–Euler dynamics
Computed-torque control uses the inverse dynamics of the recursive Newton-Euler model to cancel the arm's nonlinear terms. The control law is essentially the inverse dynamics algorithm embedded in a feedback loop.
Carried by John Craig.
Denavit–Hartenberg parameters influenced by Kinematic geometry of mechanisms
Denavit and Hartenberg drew on the kinematic-chain notation and relative joint transformations of mechanism theory, especially the Reuleaux school's classification of joints and links. Their four-parameter convention gave that tradition an algebraic matrix form suited to serial chains.
Carried by Franz Reuleaux; Jacques Denavit; Richard Hartenberg.
Screw theory influenced by Kinematic geometry of mechanisms
Screw theory in robotics revives the nineteenth-century kinematic geometry of instantaneous motion, including Ball's screw algebra, which was part of the broader mechanism-theory heritage. The 1980s robot formulations explicitly return to those geometric tools.
Carried by Robert Ball; Roger Brockett.
Closed-form inverse kinematics influenced by Denavit–Hartenberg parameters
Pieper's closed-form inverse solution works on the serial-chain geometry that the Denavit-Hartenberg convention made routine to write down. The DH parameterisation of link frames was the standard way of setting up the geometric conditions Pieper exploited.
Carried by D. L. Pieper.
Numerical inverse kinematics influenced by Denavit–Hartenberg parameters
Numerical inverse kinematics iterates on the forward kinematic map written in DH parameters, using the Jacobian derived from that map. The convention supplied the standard forward model that these solvers invert numerically.
Recursive Newton–Euler dynamics influenced by Lagrangian mechanics
Recursive Newton-Euler dynamics was developed partly as a more efficient alternative to the Lagrangian energy formulation, which yielded the same equations of motion. The Lagrangian structure of inertia, Coriolis and gravity terms framed what the recursive algorithm had to compute.
Carried by John Luh; Michael Walker; Richard Paul.
Underactuation influenced by Lagrangian mechanics
Underactuated and floating-base dynamics is formulated with Lagrangian mechanics, including momentum conservation as a constraint. The energy-based equations of motion for the coupled base and limbs come from that tradition.
Numerical inverse kinematics rival of Closed-form inverse kinematics
Closed-form and numerical inverse kinematics were pursued as competing answers to the same problem from the late 1960s onward. Numerical methods were advanced precisely for arms where the geometric closed forms of the Pieper type do not exist.
Carried by D. L. Pieper.
Numerical inverse kinematics influenced by Homogeneous transformation and Jacobian formalism
Numerical inverse kinematics commonly iterates with the Jacobian and its inverse or pseudo-inverse, a technique that comes from the homogeneous-transformation and Jacobian formalism. Resolved-rate and Newton-type solvers use that matrix machinery.
Computed-torque control influenced by Homogeneous transformation and Jacobian formalism
Computed-torque control relies on the dynamic model expressed in the standard matrix form with inertia, Coriolis and gravity terms. That algebraic structure, together with the Jacobian connection between hand and joint quantities, is what the control law inverts.
Carried by John Craig.
Computational and data-driven kinematics and dynamics grew out of Numerical inverse kinematics
Computational and data-driven kinematics grew out of numerical inverse kinematics, extending iterative solvers with optimisation and, later, learned models. The numerical-solver tradition supplied the problem formulation and baseline methods.
Computational and data-driven kinematics and dynamics influenced by Recursive Newton–Euler dynamics
Modern physics engines and data-driven dynamics build on the recursive Newton-Euler algorithm for computing equations of motion efficiently. The algorithmic structure of those engines descends from it.
Underactuation influenced by Screw theory
Screw-theoretic descriptions of rigid-body motion and momentum were used to analyse floating-base and underactuated systems. The geometric formulation made momentum conservation and constraint forces easier to express.
Beyond the field
Where Robot Kinematics Dynamics's ideas came from in other fields, and what they led to there: the strongest 12 of 74 links.
Kinematic geometry of mechanisms influenced Manipulator kinematics and dynamics in Robotics
Manipulator kinematics was built directly on the kinematic geometry of mechanisms, applying linkage analysis and screw theory to open-chain arms.
Kinematic geometry of mechanisms grew out of Kinematic Mechanism Theory in Mechanical Dynamics
The early modern kinematic mechanism theory of guided motion and machine elements was systematised in the nineteenth century into the kinematic geometry of mechanisms by Reuleaux and others, who built directly on that repertoire.
Carried by Franz Reuleaux.
Lagrangian mechanics grew out of Analytical mechanics in Classical Mechanics
The Lagrangian mechanics used in robotics is the same analytical mechanics of Lagrange, applied to articulated chains; the robot formulation is a branch of that classical theory.
Carried by Joseph-Louis Lagrange.
Lagrangian mechanics grew out of Analytical Mechanics in Mechanical Dynamics
Robot Lagrangian dynamics is a direct application of analytical mechanics: the Lagrangian formulation of Lagrange and its later rigid-body form is used to derive manipulator equations of motion.
Carried by Joseph-Louis Lagrange.
Lagrangian mechanics influenced Dynamics and Computed-Torque Control in Robot Manipulation
Lagrangian mechanics is the formalism from which manipulator dynamic equations are derived; computed-torque control inverts those equations, so the method depends directly on the Lagrangian formulation.
Carried by Joseph-Louis Lagrange.
Closed-form inverse kinematics grew out of Manipulator kinematics and dynamics in Robotics
Closed-form inverse kinematics grew directly out of manipulator kinematics: Pieper's 1968 solution for six-axis arms with spherical wrists is a result within that body of work.
Carried by Donald Pieper.
Numerical inverse kinematics grew out of Manipulator kinematics and dynamics in Robotics
Numerical inverse kinematics is a branch of manipulator kinematics and dynamics, applying iterative solution methods to the kinematic equations of robot arms.
Recursive Newton–Euler dynamics influenced by Rigid body dynamics in Mechanical Dynamics
The recursive Newton–Euler algorithm applies Newton's and Euler's rigid-body equations of motion to each link of a serial chain, propagating velocities and accelerations outward and forces inward. The 1975 formulation by Luh, Walker and Paul is a direct computational use of classical rigid-body dynamics.
Carried by Isaac Newton; Leonhard Euler.
Recursive Newton–Euler dynamics grew out of Manipulator kinematics and dynamics in Robotics
Recursive Newton–Euler dynamics was developed as the efficient computational core of manipulator kinematics and dynamics, giving the inverse dynamics of a serial manipulator in O(n) operations. It grew directly out of the manipulator dynamics literature of the 1960s and 1970s.
Computed-torque control grew out of Manipulator kinematics and dynamics in Robotics
Computed-torque control is a control law built directly on manipulator kinematics and dynamics, using the inverse dynamics model to linearize the closed loop. It grew out of the manipulator dynamics literature of the 1960s and 1970s.
Kinematic geometry of mechanisms influenced Musculoskeletal Biomechanics in Biomechanics
Kinematic geometry of mechanisms supplied the linkage and joint-motion analysis later used to model limb and joint kinematics.
Kinematic geometry of mechanisms influenced Remote manipulator in Robot Manipulation
The kinematic geometry of mechanisms, especially the analysis of linkages and degrees of freedom, gave remote manipulator designers the vocabulary for describing arm geometry and joint arrangements.

Robot Kinematics Dynamics is a planet in Nousfarer
Its city has a tower for each of these 12 frameworks. Land, walk in, and climb one concept at a time.
Land on Robot Kinematics DynamicsRelated fields
Fields its ideas are linked to
- Robot Manipulation 19 links
- Mechanical Dynamics 10 links
- Robotics 9 links
- Mechanical Engineering 6 links
- Classical Mechanics 6 links
- Robot Control 4 links
- Computer Animation 2 links
- Machine Design 2 links
- Rehabilitation Biomechanics 2 links
- Robot Learning 2 links
- Robot Motion Planning 2 links
- Linear Algebra 1 link
More in Robotics
- Human Robot Interaction
- Mobile Robotics
- Multi Robot Systems
- Robot Control
- Robot Learning
- Robot Manipulation
- Robot Motion Planning
- Robot Perception And Slam
- Robotics
See where Robot Kinematics Dynamics sits on the Map of Human Knowledge