Oral And Maxillofacial Surgery

Oral and maxillofacial surgery (OMFS) is the branch of dentistry that treats the mouth, jaws, face and neck by operation.

8 frameworks, from 1728 to today · Dentistry · Medicine & Health

still a working view ended · each leads to its entry below

Overview

Oral and maxillofacial surgery (OMFS) is the branch of dentistry that treats the mouth, jaws, face and neck by operation. Its practitioners remove teeth that cannot be saved, cut into the jawbone to straighten a bite, rebuild a face broken in a crash or a fight, close a cleft lip and palate, and replace missing teeth with metal posts anchored in bone. What makes the field distinctive is that it sits on a border: it grew out of the tooth-puller's trade, but its territory is the whole lower face, and its practitioners must master both the dentist's understanding of the mouth and the surgeon's understanding of bone, soft tissue and the airway. The history of OMFS is therefore the story of how a craft that began with extracting teeth acquired the skills, instruments and institutions of major surgery—and of how each new capability, from anaesthesia to titanium plates to digital planning, changed what a surgeon could attempt.

Extraction, the founding craft

Pulling teeth is ancient. Archaeological evidence shows teeth removed with flint tools thousands of years ago, and written instructions for extraction appear in classical medical texts. For most of history the operation was the work of barbers, itinerant tooth-drawers and general surgeons rather than a profession of its own. The instruments were the key (a lever), the pelican (a hooked lever), and eventually the dental forceps, whose grip and shape were refined over centuries1. The problem these tools could not solve was the broken root: a tooth that shattered during extraction left fragments that caused infection, and the early instruments had no way to reach them.

The modern specialty's origins are usually traced to the eighteenth and nineteenth centuries, when dentistry became a distinct, taught discipline. Pierre Fauchard's Le Chirurgien Dentiste (1728) described extraction technique and instruments in systematic terms, and by the nineteenth century dedicated dental schools and hospital dental departments were appearing in Europe and North America. The invention of surgical anaesthesia in the 1840s—ether and chloroform—transformed the extraction of teeth and the surgery of the jaws alike, because it made longer, more deliberate operations possible. The introduction of the local anaesthetic cocaine by Karl Koller in 1884, and the subsequent development of safer local agents, allowed dentists to operate on the mouth with the patient awake and free of pain, which made routine exodontia (tooth extraction) a controlled office procedure rather than an ordeal.

Exodontia and minor oral surgery—the removal of teeth, retained roots, and small cysts, and the drainage of abscesses—remained the core of the field's daily work and its economic base. The difficult extraction of impacted wisdom teeth, which required bone removal and sectioning of the tooth, became a defining operation of the specialty in the twentieth century, and the surgical management of impacted third molars is still among the most common procedures OMFS performs.

The jaw as a surgical object

The decisive turn came when surgeons began to operate on the jawbone itself, not merely to remove teeth from it. Two problems drove this. The first was trauma: fractures of the mandible and maxilla were common in warfare and industrial accidents, and the early treatments—wiring the teeth together to immobilise the fragments, or external splints—were crude and often left the patient unable to eat or speak properly. The second was deformity: a jaw that had healed badly, or grown abnormally, could not be corrected by dentistry alone.

The First World War was the forcing ground. Facial wounds from artillery and machine-gun fire produced injuries on a scale never seen before, and surgeons working behind the front lines—among them the French maxillofacial surgeon Léon Dufourmentel and the German-born, British-based Harold Gillies, who established a plastic surgery unit at Aldershot—developed methods for reconstructing shattered jaws and faces. Gillies's work on facial reconstruction, and the parallel development of jaw fracture treatment by surgeons such as the Frenchman René Le Fort, whose 1901 experiments on cadaver skulls described the lines along which the midface fractures, laid the anatomical foundations of facial trauma surgery. Le Fort's classification of midface fractures—still taught as Le Fort I, II and III—remains the standard vocabulary for describing how the upper jaw breaks.

The interwar and Second World War years brought further advances: antibiotics, blood transfusion, and better methods of immobilising fractures. The standard treatment for a broken mandible became closed reduction—setting the fragments and holding them with wires and splints—which worked but kept the jaw wired shut for weeks. The problem it could not solve was the complicated fracture, where fragments displaced and could not be held by wiring alone.

Rigid internal fixation

The answer was rigid internal fixation: holding bone fragments together with metal plates and screws strong enough that the jaw need not be immobilised at all. The idea was developed most influentially by the Swiss Arbeitsgemeinschaft für Osteosynthesefragen (AO), founded in 1958 by a group of surgeons who set out to standardise fracture treatment around stable internal fixation and early movement. The AO's principles—anatomical reduction, stable fixation, preservation of blood supply, and early mobilisation—were worked out first for limb fractures, but maxillofacial surgeons adapted them to the jaw. The early plates were made of stainless steel and were bulky; the later development of titanium miniplates and, from the 1970s, of small and micro plates designed specifically for the face, made rigid fixation practical in the mandible and midface. The result was that a patient with a fractured jaw could often leave hospital without their teeth wired together, eating and speaking far sooner. Rigid internal fixation is now the standard for most facial fractures, and the AO's teaching has shaped the training of maxillofacial surgeons worldwide.

Orthognathic surgery and the orthodontic partnership

A parallel line of development addressed deformity rather than injury. Surgeons had long known that a protruding or receding jaw could be cut and repositioned, but the early operations were performed without a reliable way to plan the result or to make the teeth meet correctly afterwards. The turning point was the partnership between the surgeon and the orthodontist. In the mid-twentieth century, surgeons such as the American Hugo Obwegeser developed the sagittal split osteotomy of the mandible—a way of splitting the jaw lengthwise so that the tooth-bearing segment could be moved forward or back while the jaw joint was left undisturbed—and the Le Fort I osteotomy for moving the upper jaw. These operations, combined with orthodontic treatment before and after surgery to align the teeth, made orthognathic surgery (surgery to correct jaw position) a predictable procedure. The orthodontist straightens and coordinates the teeth; the surgeon moves the bone; the two plan the final bite together2. Cephalometric analysis—measurement of the skull and jaws from standardised radiographs—gave the team a way to predict the result on paper before operating. The partnership between orthodontics and surgery remains the organising principle of the field's corrective work.

Cleft and craniofacial team care

The cleft lip and palate is a congenital gap in the lip and roof of the mouth, and its repair is one of the oldest reconstructive operations in surgery, described in Chinese and Indian texts centuries ago. What changed in the twentieth century was not the existence of the operation but its organisation. Repairing a cleft well requires not one operation but a sequence: closing the lip in infancy, closing the palate, managing the teeth and bite as the child grows, and sometimes revising the nose and jaw in adolescence. The recognition that no single practitioner could manage all of this led to the cleft team—surgeon, orthodontist, speech therapist, paediatrician, and others working together—and to the modern craniofacial team, which treats children with more extensive malformations of the skull and face. The team model, rather than any single technique, is the field's central contribution here, and it has been adopted internationally as the standard of care.

Implants and the replacement of missing parts

The replacement of missing teeth with artificial roots is an old ambition—gold and ivory implants were attempted in the nineteenth century—but the modern era began with a serendipitous observation. In the 1950s the Swedish orthopaedic surgeon Per-Ingvar Brånemark, studying blood flow in bone, found that titanium chambers implanted in rabbit bone could not be removed: the bone had grown directly against the metal. He named the phenomenon osseointegration and, with colleagues, developed the titanium dental implant, reporting successful clinical cases in the 1960s and publishing the foundational work in the 1970s and 1980s. The implant—a screw of titanium placed in the jawbone to support a crown, bridge or denture—gave maxillofacial surgeons a way to replace missing teeth without cutting down neighbouring teeth, and later to anchor facial prostheses and to reconstruct jaw defects after tumour surgery. Implantology is now shared between OMFS and prosthodontics, and the surgical placement of implants, including bone grafting to build up deficient jaw, is a major part of the specialty's practice.

Digital planning and the present

The most recent turning point is digital. From the 1990s, computed tomography and then cone-beam CT allowed surgeons to see the jaw in three dimensions; computer software allowed them to plan an operation on a virtual model of the patient's skull, to simulate the movement of bone, and to design cutting guides and custom-made plates that are manufactured by computer-aided design and manufacturing (CAD/CAM). In orthognathic surgery, the virtual plan can be transferred to the operating room through splints or guides, and in reconstruction after tumour removal, a fibula flap—a segment of the leg bone—can be shaped on a model to rebuild the jaw. Digital planning has made complex operations more predictable and has shortened operating time, and it is now routine in many centres for orthognathic, reconstructive and implant surgery.

Today OMFS is a recognised specialty in most countries, though its training route varies: in some systems it is entered from dentistry and requires a medical degree as well, while in others it is a dental specialty with surgical training. Its practitioners work in hospitals and offices, treating trauma, deformity, cysts and tumours of the jaws, infections of the face and neck, and the surgical aspects of implant and reconstructive care. The questions still open are familiar ones in surgery generally: how to make reconstruction more biological, how to reduce the morbidity of major operations, how to train surgeons safely, and how to extend digital planning from the operating room into long-term outcomes. What has not changed is the field's position on the border—between the mouth and the face, between dentistry and surgery—which is both its difficulty and its reason for existing.

References

  1. Dental extraction (History), Wikipedia
  2. Orthognathic surgery, Wikipedia

The frameworks of Oral And Maxillofacial Surgery

Each framework is a way of working the field has used: when it held, and the question it answers.

  1. 1728-Present

    Exodontia and Minor Oral Surgery

    How are teeth and small mouth lesions removed safely?

    Fly to its tower in Nousfarer

  2. 1901-Present

    Facial Trauma Surgery

    How are broken jaws and faces set and healed?

    Fly to its tower in Nousfarer

  3. 1914-1930

    Warfare-Driven Maxillofacial Reconstruction

    How can shattered faces be rebuilt after war wounds?

    Fly to its tower in Nousfarer

  4. 1930-Present

    Cleft and Craniofacial Team Care

    Who should coordinate the repair of a cleft through childhood?

    Fly to its tower in Nousfarer

  5. 1950-Present

    Orthognathic surgery

    How can the jaws be moved so the teeth meet correctly?

    Fly to its tower in Nousfarer

  6. 1958-Present

    Rigid Internal Fixation (AO Principles)

    How can broken facial bones be held without wiring the jaw shut?

    Fly to its tower in Nousfarer

  7. 1965-Present

    Dental implant

    How can missing teeth be anchored permanently in bone?

    Fly to its tower in Nousfarer

  8. 1990-Present

    Virtual Surgical Planning and CAD/CAM

    How can jaw surgery be planned and guided by computer?

    Fly to its tower in Nousfarer

How the ideas connect

Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.

Exodontia and Minor Oral SurgeryFacial Trauma SurgeryWarfare-Driven Maxillofacial Reconstr…Cleft and Craniofacial Team CareOrthognathic surgeryRigid Internal Fixation (AO Principle…Dental implantVirtual Surgical Planning and CAD/CAM

Beyond the field

Where Oral And Maxillofacial Surgery's ideas came from in other fields, and what they led to there: the strongest 12 of 45 links.

A city in Nousfarer: a red-carpeted stair climbing terraces to a crowned tower on an acropolis, more towers round it, forest and snowy mountains beyond.
A city in Nousfarer, the game played in the browser.

Oral And Maxillofacial Surgery is a planet in Nousfarer

Its city has a tower for each of these 8 frameworks. Land, walk in, and climb one concept at a time.

Land on Oral And Maxillofacial Surgery

Related fields

Fields its ideas are linked to

More in Dentistry

See where Oral And Maxillofacial Surgery sits on the Map of Human Knowledge