- Atlas
- Medicine & Health
- Orthodontics
Orthodontics
Orthodontics is the branch of dentistry that moves teeth and guides the growth of the jaws.
9 frameworks, from 1890 to today · Dentistry · Medicine & Health
- Angle's classification and edgewise paradigm 1890-Present
- Cephalometric analysis 1930-Present
- Functional appliance and growth modification therapy 1930-Present
- Extraction versus non-extraction controversy 1940-Present
- Orthodontic-surgical treatment of dentofacial deformity 1970-Present
- Straight-wire (pre-adjusted) appliance system 1970-Present
- Evidence-based orthodontics 1990-Present
- Clear aligners 1999-Present
- Skeletal anchorage with temporary anchorage devices 2000-Present
Overview
Orthodontics is the branch of dentistry that moves teeth and guides the growth of the jaws1. Its practitioners straighten crowded or protruding teeth, close or open gaps, correct bites that meet badly, and reshape the dental arches so that chewing, speaking, and the health of the gums and jaw joint all work better. The field matters because a malocclusion—literally a "bad closing," the way the upper and lower teeth meet—is not only a cosmetic problem: severe crowding traps plaque and invites decay, a deep overbite can damage the palate, and a jaw that sits too far forward or back can make eating and breathing difficult. What makes orthodontics distinctive within dentistry is that it works on living, moving tissue. A tooth is not glued into the jaw; it sits in a socket cushioned by the periodontal ligament, and a steady, gentle force will make bone dissolve on one side of the root and rebuild on the other, so the tooth drifts through bone. Almost every technique in the field's history is an attempt to exploit that biological fact safely and predictably.
Straightening Teeth Before There Was a Specialty
Teeth have been straightened for a very long time. Archaeologists have found Roman-era teeth bound with gold wire, and Etruscan burials with appliances that appear to have held teeth in alignment. These are isolated finds, and we cannot say how common the practice was or what its makers understood about it. What we can say is that the idea of mechanically repositioning teeth is ancient, even if it was not a recognized branch of medicine.
The modern starting point is usually placed in eighteenth-century France. Pierre Fauchard, in Le Chirurgien Dentiste (1728), described a removable appliance he called a bandeau—a strip of metal shaped to the arch and tied in place—for expanding and aligning teeth, and he discussed the extraction of crowded teeth to relieve the arch. Fauchard's work is the foundation of clinical dentistry generally, and his treatment of tooth position is the first systematic account of orthodontic mechanics in the European tradition. In the following decades practitioners experimented with wires, plates, and ligatures, but the field remained a corner of general dental practice, without its own theory of why teeth move or where they should end up.
Angle and the Birth of a Specialty
The person who turned this scattered craft into a discipline was Edward Hartley Angle, an American dentist12. Angle's central contribution was classification. In the 1890s he proposed that the key to diagnosing a malocclusion is the relationship of the first permanent molars—the large back teeth that erupt around age six—because they act as the "keystone" of the bite3. He sorted malocclusions into three classes based on how the upper and lower first molars meet: Class I, where the molars are in normal relationship but the front teeth are crowded or protrusive; Class II, where the lower jaw or lower teeth sit too far back; and Class III, where the lower jaw sits too far forward. This scheme, refined over the following years, is still the working vocabulary of the field1. It gave practitioners a shared language for diagnosis and a way to compare cases.
Angle also built appliances. His early work used expansion arches and removable plates, but his lasting mechanical legacy is the edgewise appliance, introduced around 1925. In the edgewise bracket, a rectangular slot in the bracket accepts a rectangular wire, so that the wire can control not just the position of the tooth but its rotation and tilt1. This was a genuine advance: earlier round-wire systems could pull teeth along but could not precisely torque them—twist the root in its socket—and torque is what lets a clinician move a root without tipping the crown. Angle trained a generation of students, and his school in St. Louis became the seedbed of the specialty2. By the early twentieth century orthodontics had its own societies, journals, and training programs, largely on the strength of Angle's classification and his teaching.
Cephalometrics: Measuring the Face
The next problem was measurement. Angle's classification described how teeth met, but it could not say where the teeth sat relative to the skull, or how much of a malocclusion was dental and how much was skeletal. The answer came from a technology borrowed from anthropology and radiology: the cephalometer, a device that holds the head in a fixed position while a lateral X-ray is taken, so that successive images of the same patient can be compared. The technique was developed in the 1920s and 1930s, with Holly Broadbent in the United States and B. Holly Broadbent's work at Western Reserve, and independently the cephalometric approach was taken up in Europe by researchers including Arne Björk in Sweden. From these images clinicians traced standard landmarks—points on the skull, jaw, and teeth—and measured angles and distances between them4.
Cephalometrics changed orthodontics in two ways. First, it made growth visible: by taking serial X-rays of the same child, researchers could watch the jaws develop and see which treatments actually altered growth. Second, it made treatment planning quantitative. A clinician could now ask whether a Class II problem was caused by a small lower jaw, a protrusive upper jaw, or simply protruding upper teeth, and choose a treatment accordingly. The method also produced a long-running debate about norms—whose faces the "normal" measurements described—and about how much a single tracing could tell you. But as a diagnostic tool it became, and remains, standard.
Growth Modification and Functional Appliances
If the jaws are still growing, can treatment steer that growth? This question drove a major strand of twentieth-century orthodontics. Functional appliances are devices that hold the jaws in a particular relationship and use the muscles of the mouth and face to exert force on the teeth and jaws. The best-known is the activator, developed by the Norwegian orthodontist Viggo Andresen in the 1930s, which holds the lower jaw forward and is worn mostly at night. The premise was that holding the jaw forward would encourage the lower jaw to grow and the upper teeth to move back.
The evidence for how much functional appliances actually change skeletal growth, as opposed to moving teeth, has been contested for decades. What is clear is that they can be effective in growing children for certain Class II problems, and that their effect is partly dental and partly skeletal, with the balance depending on the appliance, the age of the patient, and how faithfully it is worn. The broader lesson—that the growing patient is a different therapeutic problem from the adult—became a defining feature of the field. Orthodontists learned to time treatment to growth spurts and to distinguish "growth modification," which works only while growth is available, from tooth movement, which works at any age.
The Edgewise Revolution and Straight-Wire
Angle's edgewise appliance was powerful but laborious: the clinician bent a wire by hand for every tooth, adding loops and curves to produce the desired force. The mid-twentieth century saw a long effort to make fixed appliances more efficient. Charles Tweed, an Angle student, developed a system of extracting four premolars to gain space and then using edgewise mechanics to close it, and his approach—later called the Tweed technique—became widely taught. Meanwhile, clinicians experimented with bracket designs and wire alloys. The arrival of stainless steel wires, and later of nickel-titanium alloys that spring back to a set shape, made it possible to deliver lighter, more continuous forces.
The decisive step was the straight-wire appliance, introduced by Lawrence Andrews in the 1970s1. Andrews had measured the positions of teeth in people with naturally good occlusion and found that each tooth has a characteristic angulation and inclination. He built those values into the bracket itself, so that a flat wire placed in the brackets would, in principle, move every tooth to its ideal position without the clinician bending individual compensations1. This "pre-adjusted" appliance, refined by others including Ronald Roth, dramatically simplified treatment and became the dominant fixed-appliance system in the world. It is the direct ancestor of the brackets most patients wear today.
The Extraction Debate
Running through all of this was a persistent argument: when the arch is too small for the teeth, should you make room by extracting teeth, or expand the arch and keep them? Angle believed in preserving the full dentition and expanding the arches; Tweed and others argued that many cases needed premolar extraction to achieve stable results1. The controversy was not merely technical. It reflected different beliefs about whether the jaw could be permanently enlarged, how much relapse was acceptable, and what "success" meant. The debate has never been fully settled, because the answer depends on the individual case, and modern practice uses both strategies—extraction for severe crowding or protrusion, non-extraction expansion for others—guided by diagnosis rather than doctrine.
Surgery, Anchorage, and the Adult Patient
For patients whose jaws are too far apart in size or position for braces alone, orthodontics joined with surgery. Orthognathic surgery—cutting and repositioning the jawbones—developed through the mid-twentieth century, and by the 1970s and 1980s a combined orthodontic-surgical approach was established: braces to align the teeth before and after, surgery to move the jaw, and careful planning to make the two meet. Cephalometric tracing and, later, three-dimensional imaging made this planning far more precise.
A parallel problem was anchorage—the resistance that lets a clinician pull some teeth without unwanted movement of others. Traditionally anchorage came from other teeth or from headgear worn outside the mouth. In the late twentieth century, small titanium screws called temporary anchorage devices (TADs) were placed in the jawbone to serve as fixed anchors, allowing movements that had previously been impossible or required surgery. TADs became common in the 2000s and are now routine for many cases.
Clear Aligners and the Digital Turn
The most visible recent change is the clear aligner. The idea of moving teeth with a series of removable plastic trays was developed in the 1990s, most famously by Align Technology, whose Invisalign system (introduced around 1999) used digital scanning and computer modeling to plan a sequence of aligners5. Early aligners could handle only mild cases; over the following two decades, improvements in materials, attachments bonded to the teeth, and planning software extended their range. Aligners did not replace fixed appliances—complex cases still often need brackets—but they changed the economics and the patient experience of orthodontics, and they pushed the field toward digital workflows: intraoral scanning, three-dimensional treatment simulation, and computer-aided design of appliances.
Evidence and the Present
Alongside these technical shifts, orthodontics has moved, unevenly, toward evidence-based practice. The field has a long history of confident claims later softened by data—about growth modification, about the stability of expansion, about the necessity of extractions. Systematic reviews and randomized trials have become part of the literature, and the questions they address are the ones that remain open: how much skeletal change is really achievable, which treatments relapse and why, how to predict who will respond to growth modification, and how to compare aligners with fixed appliances on outcomes rather than convenience. The tools have changed enormously since Fauchard's metal band, but the underlying problem—moving living teeth and guiding growing jaws without doing harm—is the same one the field has always faced.
References
- Orthodontics (introduction, History, Edgewise appliance), Wikipedia
- Edward Angle, Wikipedia
- Malocclusion, Wikipedia
- Cephalometric analysis, Wikipedia
- Align Technology (Invisalign), Wikipedia
The frameworks of Orthodontics
Each framework is a way of working the field has used: when it held, and the question it answers.
- 1890-Present
Angle's classification and edgewise paradigm
How should malocclusions be classified and corrected?
- 1930-Present
Cephalometric analysis
Where do teeth and jaws sit relative to the skull?
- 1930-Present
Functional appliance and growth modification therapy
Can treatment steer the growth of the jaws?
- 1940-Present
Extraction versus non-extraction controversy
Should crowded teeth be extracted or the arch expanded?
- 1970-Present
Orthodontic-surgical treatment of dentofacial deformity
How can jaw deformity be corrected by surgery?
- 1970-Present
Straight-wire (pre-adjusted) appliance system
Can brackets be built to place teeth ideally?
- 1990-Present
Evidence-based orthodontics
What does the evidence say works in treatment?
- 1999-Present
- 2000-Present
Skeletal anchorage with temporary anchorage devices
How can stable anchorage be obtained to move teeth?
How the ideas connect
Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.
Cephalometric analysis influenced by Angle's classification and edgewise paradigm
Cephalometric analysis was developed to measure where teeth and jaws sit relative to the skull, a question Angle's molar-relationship classification could not answer. Broadbent and Björk built the method on the diagnostic need Angle's system created.
Carried by B. Holly Broadbent; Arne Björk.
Extraction versus non-extraction controversy reacted against Angle's classification and edgewise paradigm
The extraction controversy arose as a direct challenge to Angle's doctrine of preserving the full dentition and expanding the arches. Tweed, an Angle student, argued from treated cases that many malocclusions required premolar extraction for stability.
Carried by Charles Tweed.
Straight-wire (pre-adjusted) appliance system grew out of Angle's classification and edgewise paradigm
The straight-wire appliance grew directly out of Angle's edgewise bracket, keeping the rectangular slot and rectangular wire but building the individual tooth compensations into the bracket. Andrews measured natural occlusions to set those values, replacing the hand-bent wire of edgewise technique.
Carried by Lawrence Andrews; Ronald Roth.
Functional appliance and growth modification therapy influenced by Cephalometric analysis
Serial cephalometric X-rays made it possible to see whether functional appliances actually altered jaw growth rather than only moving teeth. Cephalometric measurement supplied the method by which growth-modification claims were tested and debated.
Carried by Arne Björk.
Orthodontic-surgical treatment of dentofacial deformity influenced by Cephalometric analysis
Orthognathic surgical planning depended on cephalometric tracings to quantify the skeletal discrepancy and to predict the result of jaw surgery. Cephalometric analysis provided the measurement framework surgeons used to decide how much bone to move.
Evidence-based orthodontics influenced by Extraction versus non-extraction controversy
The unresolved extraction debate became a prime target for evidence-based orthodontics, which sought systematic evidence on whether extraction or non-extraction gave more stable results. The controversy supplied the question that early systematic reviews tried to answer.
Evidence-based orthodontics influenced by Cephalometric analysis
Evidence-based orthodontics drew heavily on the cephalometric literature, using its measured outcomes to judge which treatments worked. The accumulated cephalometric studies became a core body of evidence that systematic reviews assessed.
Clear aligners influenced by Straight-wire (pre-adjusted) appliance system
Clear aligner systems were designed as an alternative to the fixed pre-adjusted brackets that dominated treatment, borrowing the idea of building planned tooth positions into the appliance. Aligner therapy took the straight-wire goal of predetermined final tooth positions and pursued it with removable plastic instead of brackets.
Beyond the field
Where Orthodontics's ideas came from in other fields, and what they led to there: the strongest 12 of 14 links.
Orthodontic-surgical treatment of dentofacial deformity grew out of Orthognathic surgery in Oral And Maxillofacial Surgery
Orthodontic-surgical treatment of dentofacial deformity is the combination of orthodontics with orthognathic surgery; the combined approach grew directly out of the surgical procedures developed for jaw repositioning. The framework is the orthodontic half of that joint enterprise.
Clear aligners influenced by Digital Dentistry in Dentistry
Clear aligners depend on digital dentistry's intraoral scanning, digital model storage and computer-driven treatment planning, which passed directly into aligner workflows. Align Technology's system was built on digital dental scanning and CAD treatment simulation developed in the 1980s and 1990s.
Carried by Align Technology.
Skeletal anchorage with temporary anchorage devices influenced by Osseointegration and Peri-Implant Care in Periodontology
Temporary anchorage devices are orthodontic miniscrews whose stability rests on the osseointegration concept established by Brånemark and on peri-implant care principles from implant dentistry. Orthodontic anchorage screws were developed by adapting implant osseointegration knowledge to short-term skeletal anchorage.
Carried by Per-Ingvar Brånemark.
Cephalometric analysis influenced by Craniology and racial typology in Bioarchaeology
Cephalometric analysis borrowed the craniometric landmark-and-measurement method from physical anthropology and craniology, applying it to living patients via radiographs. Broadbent and Hofrath's 1931 technique translated the anthropologist's skull measurements into a clinical tracing system.
Carried by B. Holly Broadbent; Hofrath.
Cephalometric analysis influenced by Oral and maxillofacial radiology in Dentistry
Cephalometrics became possible only through the introduction of standardized lateral cephalometric radiography, developed within oral and maxillofacial radiology. Broadbent's cephalostat and the radiological technique supplied the raw images the analysis measures.
Carried by B. Holly Broadbent.
Functional appliance and growth modification therapy influenced by Growth and Developmental Norms in Pediatrics
Growth-modification therapy took its norms and timing from pediatric growth and developmental standards, using them to decide when and how much to intervene. The clinical rationale for intercepting growth rests on those normative growth curves.
Functional appliance and growth modification therapy grew out of Growth and Development Orthodontic Framework in Pediatric Dentistry
Functional appliance therapy grew out of the growth-and-development framework: it assumed that mandibular and maxillary growth could be guided, and built its clinical rationale on that developmental theory. The appliance designers drew directly on the growth literature to justify their devices.
Functional appliance and growth modification therapy influenced Primary Dentition Management in Pediatric Dentistry
Functional appliance and growth modification therapy, developed in orthodontics, was incorporated into pediatric dental management of the developing dentition, including interceptive treatment and space maintenance. The framework's growth-oriented interventions come from this orthodontic tradition.
Orthodontic-surgical treatment of dentofacial deformity influenced Virtual Surgical Planning and CAD/CAM in Oral And Maxillofacial Surgery
Orthodontic-surgical treatment of dentofacial deformity established the clinical problems of predicting jaw movement and surgical outcome that virtual planning was developed to solve. The planning framework was built to serve these combined orthodontic and surgical cases.
Orthodontic-surgical treatment of dentofacial deformity influenced by Rigid Internal Fixation (AO Principles) in Oral And Maxillofacial Surgery
Rigid internal fixation, developed by the AO school, was adopted by maxillofacial surgeons for orthognathic procedures, allowing stable jaw fixation without prolonged immobilization. That stability made combined orthodontic-surgical planning practical.
Evidence-based orthodontics influenced by Evidence-Based Obstetrics in Obstetrics
Evidence-based orthodontics took its name, hierarchy of evidence and critical-appraisal methods from the evidence-based medicine movement, whose obstetrics branch (Cochrane collaboration, systematic reviews of perinatal trials) was the earliest and most cited model. Orthodontic authors explicitly borrowed the Cochrane systematic-review format and RCT appraisal for orthodontic questions.
Carried by Archie Cochrane; Cochrane Collaboration.
Clear aligners influenced by CAD/CAM dentistry in Restorative Dentistry
CAD/CAM dentistry contributed the digital scanning, computer modelling and computer-controlled fabrication that aligner manufacturing relies on. Aligner production uses stereolithographic and CAD/CAM fabrication methods developed in restorative dentistry.

Orthodontics is a planet in Nousfarer
Its city has a tower for each of these 9 frameworks. Land, walk in, and climb one concept at a time.
Land on OrthodonticsRelated fields
Fields its ideas are linked to
- Oral And Maxillofacial Surgery 5 links
- Dentistry 2 links
- Pediatric Dentistry 2 links
- Bioarchaeology 1 link
- Periodontology 1 link
- Restorative Dentistry 1 link
- Obstetrics 1 link
- Pediatrics 1 link