- Atlas
- Engineering
- Electromagnetics
Electromagnetics
Electromagnetics is the branch of electrical engineering that deals with electric and magnetic fields: how they are produced by charges and currents, how they propagate through space and along conductors, and how they can be shaped, guided, radiated, and received.
8 frameworks, from 1865 to today · Electrical Engineering · Engineering
- Field Theory 1865-Present
- Telegrapher's equations 1885-Present
- Antenna Theory 1900-Present
- Guided-Wave and Microwave Engineering 1940-Present
- Scattering and Radar Cross-Section Analysis 1945-Present
- Electromagnetic Compatibility and Signal Integrity 1950-Present
- Computational Electromagnetics 1966-Present
- Metamaterial 2000-Present
Overview
Electromagnetics is the branch of electrical engineering that deals with electric and magnetic fields: how they are produced by charges and currents, how they propagate through space and along conductors, and how they can be shaped, guided, radiated, and received1. Its practitioners design antennas, microwave circuits, radar systems, transmission lines, and the electromagnetic compatibility that keeps electronic devices from interfering with one another. What makes the field distinctive is that its objects are invisible and often intangible—an engineer reasons about fields through mathematics, and a design succeeds when the predicted field distribution matches what a measurement later confirms. The history of electromagnetics is the story of how natural philosophy became a quantitative science, and then an engineering discipline that put radio waves, microwaves, and controlled scattering to work.
From Amber and Lodestone to Coulomb's Law
The oldest observations of electromagnetism are static: rubbed amber attracts bits of straw, and lodestone attracts iron. The English physician William Gilbert, in De Magnete (1600), distinguished the magnetic attraction of lodestone from the electrostatic attraction of rubbed amber, coining the term "electric" from the Greek word for amber. For two centuries these remained separate curiosities. In 1785 Charles-Augustin de Coulomb used a torsion balance to show that the force between two electric charges falls off as the inverse square of their separation—the same law Newton had found for gravity. This was the first quantitative law of electricity, and it made electrostatics a calculable science.
Volta, Ørsted, and the Union of Electricity and Magnetism
Alessandro Volta's pile (1800) provided the first steady source of electric current, and with it came a flood of new phenomena. In 1820 Hans Christian Ørsted noticed that a compass needle deflected near a wire carrying current—the first demonstration that electricity and magnetism were connected1234. Within months André-Marie Ampère worked out the force law between current-carrying wires and the magnetic field around a current145. Michael Faraday, beginning in 1831, discovered electromagnetic induction: a changing magnetic field induces a current in a nearby circuit263. Faraday had little mathematical training and described his results in terms of "lines of force"—invisible curves along which magnetic and electric effects act. These lines were a physical intuition that later mathematics would formalize, and they remain the mental picture engineers use today.
Maxwell's Equations and the Field Theory
James Clerk Maxwell, in the 1860s, translated Faraday's lines of force into a system of equations172. His key addition was the "displacement current": a changing electric field, he argued, must produce a magnetic field just as a real current does4. With this term the equations became symmetric, and they predicted that a disturbance in the electric and magnetic fields would propagate through space at a speed equal to the measured speed of light. Maxwell concluded that light itself is an electromagnetic wave12. This was the birth of field theory: the idea that the fundamental objects are not charges acting at a distance but fields filling space, governed by partial differential equations. Heinrich Hertz confirmed the prediction experimentally in 1887–1888, generating and detecting radio waves in his laboratory and showing they reflected, refracted, and polarized like light. The field concept was now not only mathematically elegant but experimentally real.
Transmission Lines and the Beginnings of Guided Waves
While Maxwell's theory described fields in open space, engineers needed to move electromagnetic energy along conductors. The telegraph and later the telephone made this urgent. In 1855 William Thomson (Lord Kelvin) analyzed signal propagation on submarine cables, and in 1885 Oliver Heaviside reformulated transmission-line theory in its modern form, introducing the telegrapher's equations that relate voltage and current along a line to its distributed inductance and capacitance. Heaviside showed that a line with the right balance of resistance, inductance, conductance, and capacitance would transmit signals without distortion—a result that guided cable design for decades. Transmission-line theory became the bridge between lumped circuit analysis and full field theory: at low frequencies a line behaves like a circuit, but as frequency rises, its distributed nature matters, and the line must be treated as a guide for electromagnetic waves.
Radio, Antennas, and the Birth of Wireless Engineering
Hertz's experiments were laboratory curiosities; Guglielmo Marconi made them commercial8. Beginning in the mid-1890s, Marconi demonstrated wireless telegraphy over increasing distances, and by 1901 he had sent a signal across the Atlantic. This created the first large-scale engineering demand for antennas—the structures that launch and receive electromagnetic waves. Early antennas were empirical: long wires, loops, and spark-gap transmitters tuned by trial. The theoretical understanding came from the field theory itself. In 1886 Heinrich Hertz had derived the radiation from a dipole, and in the early twentieth century engineers such as Arnold Sommerfeld and others developed the mathematics of radiation from wires and apertures. Antenna theory became a distinct engineering subject: the relationship between current distribution on a conductor and the far-field radiation pattern, the concept of radiation resistance, and the design of directional arrays. The Yagi–Uda antenna, invented in Japan in 1926, and the horn and parabolic reflector antennas developed in the 1930s, showed that antenna shape could control beam direction and gain—principles that remain central.
Microwave Engineering and the War Years
The development of radar during the 1930s and World War II transformed electromagnetics from a largely low-frequency discipline into a microwave one. Radar required generating, guiding, and radiating electromagnetic waves at centimeter wavelengths, where ordinary circuit components behave badly and transmission-line effects dominate. The invention of the cavity magnetron in 1940 gave practical high-power microwave sources, and the need to route microwave energy led to waveguide theory: the analysis of hollow metal pipes as guides for electromagnetic waves, with cutoff frequencies below which waves cannot propagate. The MIT Radiation Laboratory, established in 1940, brought together physicists and engineers who produced a systematic body of microwave engineering—waveguide components, directional couplers, cavity resonators, and antenna designs—much of it published in the Radiation Laboratory Series after the war. This work established guided-wave and microwave engineering as a coherent field, with its own components, measurement techniques, and design methods.
Scattering and Radar Cross-Section
Radar also created the problem of scattering: how does an object reflect electromagnetic waves, and how much of the incident energy returns to the receiver? The radar cross-section (RCS) is a measure of this, expressed as an equivalent area that would scatter isotropically to produce the observed return. During and after the war, engineers developed methods to predict RCS from object shape and material. Exact solutions existed for simple shapes—the sphere, the cylinder, the flat plate—and asymptotic methods such as geometrical optics and the physical theory of diffraction (developed by Pyotr Ufimtsev in the 1950s and 1960s) extended the analysis to complex bodies. The practical stakes were high: reducing RCS was central to stealth aircraft design, while predicting it was essential for radar detection9. Scattering analysis became a branch of electromagnetics in its own right, linking field theory to the geometry of real objects.
Computational Electromagnetics
For most real problems—an antenna on an aircraft, a microwave circuit with irregular boundaries, scattering from a complex target—Maxwell's equations cannot be solved analytically10. The digital computer changed this. Beginning in the 1960s, numerical methods were adapted to electromagnetics11. The method of moments, formalized for electromagnetic problems by Roger Harrington in 1967, converts integral equations for currents on conductors into matrix equations solvable by computer. The finite-difference time-domain method, introduced by Kane Yee in 1966, discretizes space and time on a grid and steps the field forward in time—simple to implement and naturally broadband. The finite element method, developed for structural engineering and adapted to electromagnetics in the 1970s and 1980s, handles complex geometries with unstructured meshes. These methods turned electromagnetics into a design tool: an engineer could now predict the performance of an antenna or circuit before building it. Computational electromagnetics became a subfield with its own concerns—mesh generation, numerical dispersion, absorbing boundary conditions, and the trade-offs between frequency-domain and time-domain solvers.
Electromagnetic Compatibility and Signal Integrity
As electronic systems proliferated, so did unintended electromagnetic interactions. Electromagnetic compatibility (EMC) is the engineering of ensuring that devices neither emit excessive interference nor are unduly susceptible to it12. The field grew through the mid-twentieth century as radio communication, radar, and then digital electronics filled the spectrum. Military standards in the 1940s and 1950s, and later civilian regulations, forced designers to measure and control emissions and immunity. Signal integrity is the closely related concern at the circuit-board level: at high frequencies, traces on a printed circuit board behave as transmission lines, and reflections, crosstalk, and radiation degrade digital signals. The rise of fast digital electronics in the 1980s and 1990s made signal integrity a mainstream design discipline, drawing directly on transmission-line theory and field analysis.
Metamaterials and Engineered Media
For most of its history, electromagnetics dealt with materials found in nature, whose electromagnetic properties—permittivity and permeability—are positive and fixed. In the late 1990s and 2000s, researchers began designing artificial structures whose effective electromagnetic properties could be engineered, including negative values13. The theoretical possibility of negative refraction had been discussed by Victor Veselago in 1967; in 2000 John Pendry and colleagues showed how arrays of split-ring resonators and wires could produce negative permeability and permittivity at microwave frequencies, and in 2001 a group led by David Smith demonstrated a negative-index material experimentally. These "metamaterials" opened the possibility of lenses that beat the diffraction limit, cloaking structures that redirect waves around an object, and compact antennas. The field remains active, with work extending to optical frequencies and to reconfigurable and active media.
The Present
Electromagnetics today is a mature field whose core—Maxwell's equations, transmission-line theory, antenna analysis, waveguide design—has been stable for decades. What has changed is the toolset: computational methods are now standard, and commercial solvers based on the method of moments, finite elements, and finite-difference time-domain methods are used daily in antenna and microwave design. The frontiers are in engineered materials, in millimeter-wave and terahertz systems for communications and sensing, in the electromagnetic analysis of increasingly dense and fast electronic systems, and in the continuing refinement of numerical methods for problems too large or too complex for direct simulation. The questions that remain open are largely quantitative—how to predict, with acceptable accuracy and cost, the behavior of fields in structures of ever greater complexity—rather than conceptual. The field that began with rubbed amber and lodestone now designs the invisible architecture of wireless communication, radar, and the electronic devices that surround us1.
References
- Electromagnetism (introduction, Electromagnetic fields, 19th century, Electrodynamics, Electrostatics, Ancient world), Wikipedia
- Electromagnetic field (History), Wikipedia
- Faraday's law of induction (History), Wikipedia
- Ampère's circuital law (Background, introduction), Wikipedia
- Lorentz force (History), Wikipedia
- Electromagnetic induction (introduction, History), Wikipedia
- Maxwell's equations, Wikipedia
- Antenna (radio), Wikipedia
- Radar cross section, Wikipedia
- Computational electromagnetics (Background), Wikipedia
- Method of moments (electromagnetics) (History), Wikipedia
- Electromagnetic compatibility, Wikipedia
- Metamaterial, Wikipedia
The frameworks of Electromagnetics
Each framework is a way of working the field has used: when it held, and the question it answers.
- 1865-Present
- 1885-Present
- 1900-Present
- 1940-Present
Guided-Wave and Microwave Engineering
How can waves be guided and controlled at high frequency?
- 1945-Present
Scattering and Radar Cross-Section Analysis
How much of a wave does an object reflect?
- 1950-Present
Electromagnetic Compatibility and Signal Integrity
How do nearby devices interfere with one another?
- 1966-Present
Computational Electromagnetics
How can field problems be solved by computer?
- 2000-Present
Metamaterial
Can engineered structure give matter new electromagnetic properties?
How the ideas connect
Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.
Telegrapher's equations grew out of Field Theory
Heaviside's telegrapher's equations were obtained by reducing Maxwell's field equations to the one-dimensional case of a line with distributed parameters, giving circuit-level voltage and current laws from field theory.
Carried by Oliver Heaviside.
Antenna Theory grew out of Field Theory
Antenna theory grew directly out of field theory: Hertz derived the radiation field of a dipole from Maxwell's equations in 1886, and later antenna analysis computed radiation patterns from assumed current distributions using the same equations.
Carried by Heinrich Hertz.
Scattering and Radar Cross-Section Analysis grew out of Field Theory
Radar cross-section analysis applied Maxwell's equations to scattering from objects, using exact solutions for spheres and cylinders and asymptotic diffraction methods built on field theory.
Carried by Pyotr Ufimtsev.
Computational Electromagnetics grew out of Field Theory
Computational electromagnetics discretizes Maxwell's equations directly: Yee's finite-difference time-domain scheme steps the field equations on a grid, and Harrington's method of moments solves integral forms of them.
Carried by Kane Yee; Roger Harrington.
Guided-Wave and Microwave Engineering grew out of Telegrapher's equations
Guided-wave theory generalized transmission-line analysis to hollow waveguides; the distributed-circuit concepts of the telegrapher's equations became the mode and cutoff analysis of microwave guides during the radar work of the 1940s.
Carried by MIT Radiation Laboratory.
Guided-Wave and Microwave Engineering influenced by Field Theory
Waveguide analysis solved Maxwell's equations with conducting boundary conditions, so the microwave engineering of the Radiation Laboratory applied field theory directly to pipes, cavities and couplers.
Carried by MIT Radiation Laboratory.
Electromagnetic Compatibility and Signal Integrity grew out of Field Theory
Electromagnetic compatibility analysis rests on field theory: coupling between devices, shielding effectiveness and crosstalk are computed from Maxwell's equations and field boundary conditions.
Metamaterial grew out of Field Theory
Metamaterial design is an application of field theory: effective medium parameters and negative refraction are derived from Maxwell's equations for structured composites.
Electromagnetic Compatibility and Signal Integrity influenced by Telegrapher's equations
Signal integrity problems such as crosstalk and reflections on interconnects are analyzed with transmission-line theory, extending the telegrapher's equations to high-speed digital lines.
Guided-Wave and Microwave Engineering influenced by Antenna Theory
Radar antenna work of the 1930s and war years, including horn and reflector designs, was carried into microwave engineering as radiating elements fed by waveguide components.
Computational Electromagnetics influenced by Antenna Theory
Antenna problems were among the first targets of numerical methods; Harrington's method of moments was formulated for wire antennas and scattering, making antenna analysis a driver of computational technique.
Carried by Roger Harrington.
Computational Electromagnetics influenced by Scattering and Radar Cross-Section Analysis
Predicting scattering from complex targets was a principal motivation for numerical electromagnetics, and RCS computation became a standard application of moment and finite-difference methods.
Metamaterial influenced by Computational Electromagnetics
Metamaterial research relied heavily on full-wave numerical simulation to design and verify subwavelength resonant structures whose behavior could not be predicted analytically.
Computational Electromagnetics influenced by Guided-Wave and Microwave Engineering
Microwave circuit and waveguide design provided early practical problems for numerical solvers, which were used to compute fields in components with irregular boundaries.
Beyond the field
Where Electromagnetics's ideas came from in other fields, and what they led to there: the strongest 12 of 44 links.
Field Theory influenced by Field theory and lines of force in Electromagnetism
Faraday's field theory and lines of force gave Maxwell the physical picture of continuous field lines and the concept of the field itself, which Maxwell then cast into equations. Maxwell explicitly built his 1865 dynamical theory of the electromagnetic field on Faraday's lines of force.
Carried by Michael Faraday; James Clerk Maxwell.
Field Theory influenced Wireless telegraphy in Wireless Networks
Heinrich Hertz's experiments confirming Maxwell's electromagnetic field theory produced the electromagnetic waves that wireless telegraphy was built to exploit. Marconi's apparatus was a direct application of the field-theoretic prediction of propagating waves.
Carried by Heinrich Hertz; James Clerk Maxwell; Guglielmo Marconi.
Field Theory influenced Electric machine in Electrical Engineering
Field theory in electromagnetics supplied the magnetic-circuit and field concepts that designers of dynamos and motors used to analyse electric machines from the 1870s.
Field Theory led to Electrical engineering and circuit theory in Electromagnetism
Circuit and network theory descends from field theory through Heaviside's reduction of Maxwell's equations to transmission-line and lumped-circuit forms.
Carried by Oliver Heaviside.
Field Theory influenced Radio in Communication Systems
Maxwell's field theory predicted electromagnetic wave propagation and provided the theoretical basis for radio. Hertz's experimental confirmation of these waves directly enabled wireless communication.
Carried by James Clerk Maxwell; Heinrich Hertz.
Field Theory influenced Broadcast and Licensed Two-Way Radio in Wireless Networks
Maxwell's field theory, confirmed by Hertz, is the physical foundation on which all radio propagation and antenna design rests. Broadcast and two-way radio engineering applied field-theoretic wave propagation to predict coverage.
Carried by James Clerk Maxwell; Heinrich Hertz.
Telegrapher's equations grew out of Transmission line in Communication Systems
The telegrapher's equations are the transmission-line equations describing voltage and current along a line, and transmission-line theory is their direct application. The line model was developed from these equations in the late nineteenth century.
Carried by Oliver Heaviside.
Telegrapher's equations grew out of Maxwell's equations in Electromagnetism
The telegrapher's equations are a one-dimensional reduction of Maxwell's equations for a guided wave, obtained by Heaviside and others from the full field equations. The line equations follow directly from Maxwell's theory.
Carried by Oliver Heaviside; James Clerk Maxwell.
Antenna Theory influenced MIMO in Communication Systems
MIMO rests on antenna array theory: the spatial channel models and array gain concepts from antenna theory were carried directly into multi-antenna system design.
Antenna Theory influenced Broadcast and Licensed Two-Way Radio in Wireless Networks
Antenna theory supplied the radiation patterns, gain and impedance calculations that broadcast and two-way radio engineering depended on for coverage planning. The theory of the antenna as a radiating element was the core design tool of the radio framework.
Antenna Theory grew out of Electromagnetic Field Theory in Electrical Engineering
Antenna theory is a branch of electromagnetic field theory, applying Maxwell's equations to radiating structures. The radiation from antennas is computed from the field equations, making antenna theory a direct outgrowth.
Carried by Heinrich Hertz; James Clerk Maxwell.
Antenna Theory grew out of Electromagnetic field theory in Physics
Antenna theory derives from electromagnetic field theory in physics, using the retarded potentials and radiation fields of Maxwell's equations. The physics field theory is the parent of the antenna framework.
Carried by Heinrich Hertz.

Electromagnetics is a planet in Nousfarer
Its city has a tower for each of these 8 frameworks. Land, walk in, and climb one concept at a time.
Land on ElectromagneticsRelated fields
Fields its ideas are linked to
- Electromagnetism 11 links
- Electrical Engineering 10 links
- Communication Systems 5 links
- Wireless Networks 4 links
- Physics 3 links
- Circuit Analysis 2 links
- Optics 2 links
- Continuum Mechanics 1 link
- Geophysics 1 link
- Electronic And Magnetic Materials 1 link
- Mechanical Behavior Of Materials 1 link
- Mechanical Engineering 1 link
More in Electrical Engineering
- Circuit Analysis
- Communication Systems
- Control Systems
- Digital Systems
- Electrical Engineering
- Information Theory
- Photonics
- Power Electronics
- Power Systems
- Rf And Microwave Engineering
- Semiconductor Electronics
- Signal Processing
- Signals And Systems
- Vlsi And Integrated Circuit Design
See where Electromagnetics sits on the Map of Human Knowledge