Electronic And Magnetic Materials

Electronic and magnetic materials are the solids whose electrons do more than hold the atoms together.

13 frameworks, from 1820 to today · Materials Science · Natural Sciences

still a working view ended · each leads to its entry below

Overview

Electronic and magnetic materials are the solids whose electrons do more than hold the atoms together. In an ordinary structural material, the electrons are locked into bonds and the interesting questions are mechanical. In this subfield, the interesting questions are about how electrons carry current, store magnetic moment, respond to a field, or organize collectively into states no one predicted. The stakes are enormous and concrete: every transformer core, hard drive, electric motor, transistor, and magnetic sensor depends on a material chosen because its electrons behave in a particular way. The history of the field is largely the history of learning to see electrons inside solids, then learning to engineer their arrangements deliberately.

Magnetism before electrons: the phenomenological era

Magnetism was a laboratory curiosity long before anyone knew what moved inside a magnet. William Gilbert's De Magnete (1600) established that the Earth itself is a magnet and distinguished magnetic attraction from the static electric attraction of rubbed amber. Through the eighteenth and early nineteenth centuries, practitioners compiled the properties of lodestone and of iron and steel needles, and Charles-Augustin de Coulomb reduced magnetic forces to an inverse-square law in the 1780s. This was a science of forces and poles, with no account of their microscopic origin.

The decisive break came when magnetism and electricity were shown to be one phenomenon. In 1820 Hans Christian Ørsted noticed that a current-carrying wire deflects a compass needle; André-Marie Ampère within weeks worked out the force law between current elements. Michael Faraday, in 1831, discovered electromagnetic induction—a changing magnetic field generates a current—and introduced the idea of lines of force filling space. James Clerk Maxwell's equations of the 1860s unified the whole subject: electricity and magnetism became a single field theory, and light itself an electromagnetic wave1. For materials, the practical consequence was that a substance could be characterized by how it modifies an applied field—its permeability and susceptibility. Faraday also discovered diamagnetism and paramagnetism, the weak responses of most substances, and in 1845 showed that a magnetic field rotates the plane of polarized light in glass, the Faraday effect, the first proof that magnetism acts on light.

Domains, hysteresis, and the metallurgy of magnets

The engineering of magnetic materials began as an empirical craft. Permanent magnets were made from hardened carbon steels, and later from alloys such as alnico (aluminium–nickel–cobalt), developed in the 1930s. The key concept that organized this craft was the magnetic domain, proposed by Pierre-Ernest Weiss in 1907: a ferromagnet is divided into regions each magnetized in a common direction, and the material's net magnetization is the sum over domains. Magnetizing a sample means growing the domains that point the right way and rotating the rest. The loop traced out when a field is cycled—the hysteresis loop—measures the energy lost per cycle, and its shape separates soft magnetic materials (easy to magnetize and demagnetize, wanted in transformer cores) from hard ones (which resist demagnetization, wanted in permanent magnets).

The metallurgical route to better magnets was anisotropy engineering: making the crystal structure or the microstructure favor one magnetization direction, so that reversing it costs energy2. The cobalt-platinum and iron-platinum alloys of the early twentieth century, and later the rare-earth magnets, all exploit this. In 1966 Karl Strnat and coworkers reported that alloys of cobalt with samarium (SmCo₅) had enormous coercivity—resistance to demagnetization—and in 1983 Masato Sagawa and, independently, John Croat and colleagues at General Motors announced neodymium–iron–boron (Nd₂Fe₁₄B), which remains the strongest permanent magnet in mass production. These magnets rest on a specific crystal structure with a single easy axis, produced by powder metallurgy and aligned before sintering. The same period produced soft magnetic materials of great purity and low loss, such as grain-oriented silicon steel and, later, amorphous and nanocrystalline alloys.

Seeing the electron: band theory and exchange

The microscopic explanation of these behaviors arrived with quantum mechanics1. In 1928 Felix Bloch showed that an electron in a periodic crystal lattice occupies allowed energy bands separated by gaps—the band theory of solids. Whether a solid conducts depends on whether a band is partly filled; whether it is magnetic depends on how the electrons' spins fill the bands. In 1929 John Slater and, separately, Léon Brillouin and others developed the idea that ferromagnetism arises when the energy cost of pairing opposite spins is outweighed by the gain from occupying different bands—the Stoner criterion, formalized by Edmund Stoner in 1938. This explained why only certain metals (iron, cobalt, nickel) are ferromagnetic.

The deeper cause of magnetism is the quantum exchange interaction, which has no classical analogue3. Two electrons with parallel spins avoid each other less than antiparallel ones because of the Pauli exclusion principle and the symmetry of their wavefunctions, and this can lower the energy3. Werner Heisenberg's 1928 model of ferromagnetism treated each atom as a localized spin coupled to its neighbors by an exchange energy; the same framework, with antiferromagnetic coupling, explained the antiferromagnetism that Louis Néel identified in the 1930s14. The competition between exchange couplings and thermal agitation sets the Curie temperature, above which ferromagnetism vanishes1. This body of theory—band theory plus exchange—became the working language of the field, and it made clear that magnetic and electronic properties are two faces of the same electron structure.

Semiconductors and the control of carriers

A parallel line of development concerned materials whose conductivity is intermediate and tunable. The foundations were laid in the 1930s and 1940s: Alan Wilson's 1931 band-theory account of semiconductors, and the recognition that impurities dominate conduction. In 1947 John Bardeen and Walter Brattain at Bell Labs made the first point-contact transistor, and in 1948 William Shockley proposed the junction transistor. The crucial materials insight was defect and doping engineering: adding a controlled trace of an element with one more or one fewer valence electron (phosphorus or boron in silicon) creates free electrons or holes, and the conductivity can be set over many orders of magnitude5. Zone refining, developed by William Pfann in the early 1950s, made silicon pure enough for this control to work. The integrated circuit, demonstrated by Jack Kilby in 1958 and by Robert Noyce in 1959, turned this into an industry whose central dynamic—shrinking devices—became known as Moore's law after Gordon Moore's 1965 observation.

Complex oxides and strongly correlated electrons

Not all electronic materials fit the independent-electron picture. In some solids the electrons interact so strongly with one another that band theory fails, and the material can switch between insulating and conducting, magnetic and nonmagnetic, under small changes of composition or temperature. These are strongly correlated materials, and the complex transition-metal oxides are their heartland67. The field's founding puzzle was the transition-metal oxides themselves: many, such as nickel oxide, are insulators although band theory predicts metals. Nevill Mott and Rudolf Peierls explained this in the late 1930s and 1940s through the Mott insulator idea—electrons repel each other so strongly that they localize8.

The modern era of oxide electronics began with the discovery of high-temperature superconductivity in layered copper oxides by Georg Bednorz and Alex Müller in 1986, which showed that a correlated oxide could carry current without resistance above the boiling point of liquid nitrogen. The same family of materials displays colossal magnetoresistance—a large change of resistance in a magnetic field—reported in manganese oxides in the 1990s9. A related landmark is the two-dimensional electron gas that forms at the interface between two insulating oxides, lanthanum aluminate and strontium titanate, reported by Akira Ohtomo and Harold Hwang in 2004. The lesson practitioners drew is that interfaces between complex oxides can host electronic states that neither bulk material possesses, and that these states can be tuned by strain, field, and stoichiometry.

Thin films, giant magnetoresistance, and spintronics

The most consequential materials development for information technology came from layered thin films. In 1988 Albert Fert and, independently, Peter Grünberg found that a sandwich of alternating ferromagnetic and nonmagnetic metal layers—iron and chromium—showed a very large change in electrical resistance when the magnetizations of the two magnetic layers were switched from parallel to antiparallel. This giant magnetoresistance (GMR) arises because electrons of different spin scatter differently at the interfaces10. The effect made it possible to read the tiny magnetic fields of a hard-disk surface with a compact sensor, and GMR read heads transformed data storage in the 1990s.

GMR opened the field of spintronics, in which the spin of the electron, not just its charge, is used as the working variable. A central device is the magnetic tunnel junction, in which two ferromagnetic electrodes are separated by a thin insulating barrier and the tunneling current depends on the relative magnetization—tunnel magnetoresistance11. The prediction and realization of very large tunnel magnetoresistance in magnesium-oxide barriers in the 2000s made such junctions practical for magnetic random-access memory. Spintronics also produced the spin-transfer torque effect, in which a spin-polarized current can switch a magnetic layer, the basis of modern magnetic memory proposals.

Two-dimensional and topological materials

The newest chapter concerns materials whose electronic behavior is governed by geometry and topology rather than by local chemistry. In 2004 Andre Geim and Konstantin Novoselov isolated graphene, a single atomic layer of carbon, and showed that its electrons behave as massless particles obeying a linear energy–momentum relation. This launched two-dimensional materials generally: single layers of hexagonal boron nitride, transition-metal dichalcogenides, and magnetic van der Waals crystals, each with properties that differ from the bulk.

A second strand is topological materials. In 2005 Charles Kane and Eugene Mele predicted that certain two-dimensional systems would host edge states that conduct while the bulk insulates, protected by the topology of the band structure. This was realized experimentally in mercury telluride quantum wells, and in 2007 the three-dimensional topological insulator was predicted and then observed in bismuth-antimony alloys. These materials are of interest because their surface electrons are robust against scattering, and because their magnetic versions can host exotic excitations. The 2010 discovery of topological insulators and the later identification of magnetic topological materials tied this strand back to the subfield's oldest theme: the interplay of spin order and electron bands.

The present

Today the field works across several connected fronts. First-principles electronic-structure calculations, especially density functional theory, are now routine tools for predicting band structures, magnetic moments, and exchange couplings before synthesis, and they guide the search for new permanent magnets and spintronic materials. Thin-film and interface engineering remains central, with molecular-beam epitaxy and sputtering allowing atomic-scale control of multilayers and oxide heterostructures11. Two-dimensional magnets, first demonstrated in 2017 in chromium triiodide, are an active frontier because they allow magnetism to be studied and switched in the ultimate thin limit. Topological and correlated materials continue to produce surprises, and the boundary between spintronics and quantum devices is blurring as researchers try to use magnetic textures and topological states for computation.

The open questions are recognizably descendants of the historical ones. How does exchange coupling behave when the material is a single atomic layer? Can a permanent magnet be made without rare earths, using abundant elements and the same anisotropy principles12? How do strongly correlated electrons organize at interfaces, and can that organization be controlled? And can spin and topology be engineered together into devices that compute with less energy than charge-based electronics? The field's history is a record of answering such questions by learning, again and again, that the electron inside a solid is a richer object than the chemist's or the engineer's first model allowed.

References

  1. Magnetism (History, Quantum-mechanical origin of magnetism, Ferromagnetism), Wikipedia
  2. Magnetocrystalline anisotropy, Wikipedia
  3. Exchange interaction, Wikipedia
  4. Ferrimagnetism (History), Wikipedia
  5. Semiconductor, Wikipedia
  6. Complex oxide, Wikipedia
  7. Strongly correlated material, Wikipedia
  8. Mott insulator (History), Wikipedia
  9. Colossal magnetoresistance (introduction, History), Wikipedia
  10. Giant magnetoresistance, Wikipedia
  11. Tunnel magnetoresistance, Wikipedia
  12. Neodymium magnet (History), Wikipedia

The frameworks of Electronic And Magnetic Materials

Each framework is a way of working the field has used: when it held, and the question it answers.

  1. 1820-1900
  2. 1907-Present
  3. 1928-Present

    Electronic band structure

    Why do some solids conduct and others not?

    Fly to its tower in Nousfarer

  4. 1928-Present
  5. 1930-Present
  6. 1931-Present
  7. 1937-Present

    Strongly correlated material

    Why do some electrons refuse to move independently?

    Fly to its tower in Nousfarer

  8. 1988-Present

    Spintronics

    How can electron spin carry information?

    Fly to its tower in Nousfarer

  9. 1988-Present

    Thin-Film and Interface Engineering

    What new states appear at interfaces and in thin films?

    Fly to its tower in Nousfarer

  10. 1990-Present

    First-Principles Electronic-Structure Prediction

    Can we predict material properties from first principles?

    Fly to its tower in Nousfarer

  11. 2004-Present

    Single-layer materials

    What happens when a material is one atom thick?

    Fly to its tower in Nousfarer

  12. 2004-Present
  13. 2005-Present

How the ideas connect

Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.

Phenomenological Electromagnetism of …Domain Theory and Hysteresis Engineer…Electronic band structureLocalized-Spin Exchange TheoryPermanent Magnet Metallurgy and Aniso…Defect and Doping Engineering of Semi…Strongly correlated materialSpintronicsThin-Film and Interface EngineeringFirst-Principles Electronic-Structure…Single-layer materialsTopological and Two-Dimensional Quant…Topological Materials

Beyond the field

Where Electronic And Magnetic Materials's ideas came from in other fields, and what they led to there: the strongest 12 of 81 links.

A city in Nousfarer: a red-carpeted stair climbing terraces to a crowned tower on an acropolis, more towers round it, forest and snowy mountains beyond.
A city in Nousfarer, the game played in the browser.

Electronic And Magnetic Materials is a planet in Nousfarer

Its city has a tower for each of these 13 frameworks. Land, walk in, and climb one concept at a time.

Land on Electronic And Magnetic Materials

Related fields

Fields its ideas are linked to

More in Materials Science

See where Electronic And Magnetic Materials sits on the Map of Human Knowledge