- Atlas
- Natural Sciences
- Corrosion And Degradation
Corrosion And Degradation
Corrosion is the slow undoing of materials by their environment.
12 frameworks, from 1824 to today · Materials Science · Natural Sciences
- Cathodic protection 1824-Present
- Electrochemical Corrosion Theory 1830-Present
- Passivation 1830-Present
- Atmospheric and Environmental Corrosion Science 1920-Present
- Scaling 1933-Present
- Localized Corrosion and Stress Corrosion Cracking 1945-Present
- Pourbaix diagram 1945-Present
- Environment-Assisted Cracking and Fracture Mechanics 1950-Present
- Localized Corrosion Science 1950-Present
- Polarization and Electrochemical Testing Methods 1950-Present
- Computational Corrosion Modeling and Life Prediction 1980-Present
- Tribocorrosion 1990-Present
Overview
Corrosion is the slow undoing of materials by their environment1. A steel bridge rusts, a copper roof turns green, a turbine blade oxidizes in a jet of hot gas, a stainless-steel implant pits in body fluid, a pipeline cracks under stress in wet soil. What unites these is that a material, left in contact with the world, changes chemically and loses the properties it was chosen for1. The stakes are enormous: corrosion destroys a large fraction of the metals produced each year, and it has brought down bridges, burst pipelines, and grounded aircraft. The history of the field is the story of how people moved from treating corrosion as an unavoidable fact of nature to understanding it as an electrochemical process they could measure, model, and design against.
From craft knowledge to the electrochemical idea
Metalworkers knew about corrosion long before anyone explained it. Iron rusts, and smiths learned to keep it dry, to coat it, and to alloy it. The ancient world's use of gold, which does not corrode, and of tin and lead coatings on iron reflects practical knowledge of which metals survive and which do not. But the explanations were pre-scientific: rusting was often attributed to air, to "acid vapors," or to a general principle of decay.
The decisive turn came with the understanding that corrosion is electrical1. In the late eighteenth and early nineteenth centuries, Luigi Galvani's and Alessandro Volta's work on electricity from metals in contact with solutions showed that two different metals joined in a conducting fluid generate a current. Humphry Davy applied this to ships: in 1824 he proposed attaching iron or zinc plates to the copper sheathing of naval vessels to protect the copper, and the method worked, though it was abandoned for practical reasons. The insight was that a metal dissolves by losing electrons, and that this dissolution can be driven or prevented electrically1. Michael Faraday's quantitative laws of electrolysis in the 1830s gave the link between current and the mass of metal dissolved, turning corrosion into a measurable electrochemical quantity2.
The nineteenth century also brought the first systematic studies of specific environments. The rusting of iron in water and the role of dissolved oxygen were debated for decades; the recognition that oxygen at the cathode drives iron dissolution at the anode clarified why rusting needs both water and air. By the early twentieth century, the electrochemical picture was established: a corrosion cell has an anode where metal dissolves, a cathode where a reduction reaction consumes electrons, and an electrolyte connecting them.
Passivity and the invention of stainless steel
A central puzzle was why some metals, notably iron in certain conditions and metals like chromium and aluminum, stop corroding even though thermodynamics says they should. The answer is passivity: a thin, adherent oxide film, often only nanometers thick, that forms on the surface and blocks further reaction1. Faraday had noted the passivation of iron in concentrated nitric acid in the 1830s. Through the late nineteenth and early twentieth centuries, researchers established that passivity is a real surface film, not a mere change in the metal.
This idea became an engineering revolution. In the early twentieth century, metallurgists in several countries independently found that adding substantial chromium to steel produces an alloy that resists rusting. The German metallurgist Benno Strauss and colleagues at Krupp developed chromium-nickel austenitic steels around 1912, and Harry Brearley in Sheffield produced a martensitic chromium steel for cutlery in 1913. The principle was passivity in practice: chromium forms a protective oxide that heals itself if scratched3. Stainless steel turned corrosion resistance from a coating problem into an alloy-design problem, and it launched a century of designing alloys—adding chromium, nickel, molybdenum, titanium—to control which passive films form and how stable they are.
Measuring corrosion: the electrochemical laboratory
If corrosion is electrochemical, it can be measured electrically. The key tool is the polarization curve: a plot of current versus applied potential that shows how fast a metal dissolves or how fast a cathodic reaction proceeds at each potential. Julius Tafel had shown in the early twentieth century that the logarithm of current is linear in potential over a range, giving the "Tafel slope."4 In the mid-twentieth century, the American electrochemist Marcel Pourbaix developed potential–pH diagrams (Pourbaix diagrams), maps showing which chemical species of a metal are stable at a given voltage and acidity—whether the metal dissolves, stays immune, or forms a passive oxide. These diagrams made it possible to reason about corrosion from thermodynamics.
The practical breakthrough for testing came with the recognition that a small applied potential perturbation around the corrosion potential yields a measurable current response whose slope gives the corrosion rate. This is the linear polarization resistance method, developed in the 1950s and widely adopted afterward, which lets an engineer estimate how fast a structure is corroding from a quick electrical measurement. Combined with the three-electrode cell, the potentiostat (an instrument that holds a metal at a chosen potential and measures the resulting current), and later impedance spectroscopy, corrosion testing became a laboratory science rather than a matter of burying samples and waiting.
Localized attack and the mechanics of failure
Uniform corrosion is predictable; the dangerous corrosion is localized. Pitting is the formation of small deep holes, often in stainless steels exposed to chloride (salt) environments, where the passive film breaks down at isolated points. Crevice corrosion occurs in shielded gaps where oxygen is depleted15. Galvanic corrosion arises when two dissimilar metals are joined in an electrolyte and the less noble one dissolves faster16. These were studied intensively from the mid-twentieth century, and the understanding that chloride ions break down passive films at specific potentials (the pitting potential) became central to specifying stainless steels for marine and chemical service.
A separate and especially destructive mode is stress corrosion cracking (SCC): the slow growth of cracks in a metal that is simultaneously under tensile stress and in a corrosive environment, even when neither alone would cause failure. SCC caused serious industrial accidents and was studied from the mid-twentieth century onward; the recognition that specific metal–environment pairs (stainless steel in chlorides, brass in ammonia, high-strength steels in humid environments) are susceptible made it a design constraint. Related is hydrogen embrittlement, in which hydrogen absorbed into a metal makes it crack7. These failure modes pushed corrosion science toward fracture mechanics, treating a crack as a growing entity with a growth rate that depends on the stress intensity and the environment.
High-temperature oxidation
At high temperatures, in air or combustion gases, metals and ceramics degrade not by wet electrochemistry but by direct reaction with oxygen and other gases. High-temperature oxidation is the growth of oxide scales on alloys in furnaces, turbine engines, and reactors. The theory was put on a quantitative footing by Carl Wagner in the 1930s, who showed that the rate of scale growth is controlled by the diffusion of ions through the oxide layer, giving the parabolic growth law (scale thickness grows with the square root of time) observed for many protective oxides. The practical goal became designing alloys that form a slow-growing, adherent, self-healing oxide—typically alumina or chromia—which is why superalloys for turbine blades contain chromium and aluminum. Spallation (the oxide flaking off), the role of sulfur and other impurities, and the interaction of oxidation with mechanical stress became major research themes through the later twentieth century.
Atmospheric and environmental corrosion
Most real corrosion happens outdoors, in the atmosphere, in soil, and in water, and the field developed a strong empirical and environmental tradition. Long-term exposure tests—steel coupons left on test racks for years in different climates—built up the data behind weathering-steel alloys (such as the copper-chromium steels that form a protective rust patina) and behind the classification of corrosivity by environment. The recognition that atmospheric corrosion depends on time-of-wetness, pollutants such as sulfur dioxide and chloride, and temperature led to standardized exposure classifications and to predictive models. This tradition connects corrosion science to infrastructure management: bridges, pipelines, and buildings are inspected and maintained on the basis of how fast their materials degrade in their particular environment.
Modeling, prediction, and the modern toolkit
From the late twentieth century, corrosion science increasingly turned to quantitative modeling and life prediction. Pourbaix diagrams, polarization curves, and kinetic laws were combined into models that predict corrosion rates and remaining life. Cathodic protection—forcing a structure to be the cathode of a cell, either with sacrificial anodes (zinc or aluminum that corrode instead of the steel) or with an impressed current—became a standard engineering method for pipelines, ship hulls, and buried tanks, and its design relies on electrochemical models12. Computational methods, including finite-element modeling of potential and current distributions and, more recently, atomistic and first-principles calculations of surface reactions, extended prediction from the laboratory to real geometries. The field also developed standardized test methods and codes that let designers specify materials and protection systems with confidence.
A distinct modern theme is tribocorrosion: degradation caused by the combined action of wear and corrosion, where mechanical rubbing removes protective films and exposes fresh metal to attack, so that the joint effect is worse than either alone. It matters in pumps, bearings, and biomedical implants, and it forced the field to integrate tribology (the science of friction and wear) with electrochemistry.
Where the field stands
Today corrosion science works at several levels at once. At the atomic and microscopic level, researchers study how passive films form and break down, using surface analysis and computation. At the component level, they measure polarization and impedance, run standardized tests, and model crack growth and remaining life. At the system level, they design cathodic protection, coatings, inhibitors, and alloy selection into infrastructure and machines. The questions still open are the hard ones: predicting when and where a passive film will fail, forecasting the lifetime of a structure from limited inspection data, understanding the combined effects of stress, wear, and chemistry, and designing materials—including new alloys and coatings—that resist degradation in increasingly demanding environments. The field began as craft knowledge of which metals last; it became a science of electrons, films, and cracks, and it remains, at bottom, the study of how to keep the made world from quietly coming apart.
References
- Corrosion (introduction, Passivation, Crevice corrosion, Galvanic corrosion, Cathodic protection, Sacrificial anode protection), Wikipedia
- Cathodic protection (History, introduction), Wikipedia
- Stainless steel, Wikipedia
- Tafel equation (introduction, History), Wikipedia
- Crevice corrosion, Wikipedia
- Galvanic corrosion, Wikipedia
- Hydrogen embrittlement, Wikipedia
The frameworks of Corrosion And Degradation
Each framework is a way of working the field has used: when it held, and the question it answers.
- 1824-Present
Cathodic protection
How can an electric current stop a metal from corroding?
- 1830-Present
Electrochemical Corrosion Theory
Why does a metal dissolve in contact with a solution?
- 1830-Present
- 1920-Present
Atmospheric and Environmental Corrosion Science
How fast do materials degrade outdoors and in soil?
- 1933-Present
- 1945-Present
Localized Corrosion and Stress Corrosion Cracking
Why does corrosion attack small spots or crack under stress?
- 1945-Present
Pourbaix diagram
Which chemical form of a metal is stable at a given voltage and acidity?
- 1950-Present
Environment-Assisted Cracking and Fracture Mechanics
How fast do cracks grow under stress in a corrosive environment?
- 1950-Present
Localized Corrosion Science
Why does corrosion concentrate at pits and crevices?
- 1950-Present
Polarization and Electrochemical Testing Methods
How can corrosion rate be measured electrically in the lab?
- 1980-Present
Computational Corrosion Modeling and Life Prediction
Can we predict how long a structure will last?
- 1990-Present
How the ideas connect
Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.
Pourbaix diagram grew out of Electrochemical Corrosion Theory
Pourbaix diagrams are thermodynamic maps of the electrochemical equilibria that corrosion theory describes; Pourbaix built them directly on the electrochemical picture of anodic dissolution and cathodic reduction.
Carried by Marcel Pourbaix.
Polarization and Electrochemical Testing Methods grew out of Electrochemical Corrosion Theory
Polarization testing methods grew out of electrochemical corrosion theory: Tafel's logarithmic current-potential relation and the mixed-potential picture made corrosion rate measurable from polarization curves.
Carried by Julius Tafel; Marcel Pourbaix.
Environment-Assisted Cracking and Fracture Mechanics grew out of Localized Corrosion and Stress Corrosion Cracking
Environment-assisted cracking and fracture mechanics grew directly out of stress corrosion cracking research, recasting crack growth as a function of stress intensity and environment.
Electrochemical Corrosion Theory influenced by Cathodic protection
Davy's 1824 demonstration that a baser metal could protect copper by galvanic action showed corrosion was electrical, a premise Faraday's electrolysis laws and later electrochemical corrosion theory built on.
Carried by Humphry Davy; Michael Faraday.
Computational Corrosion Modeling and Life Prediction influenced by Electrochemical Corrosion Theory
Computational corrosion modeling formalized the electrochemical corrosion cell, using anodic and cathodic kinetics to simulate potential and current distributions on structures.
Localized Corrosion and Stress Corrosion Cracking influenced by Passivation
The theory of passive films gave localized corrosion science its central mechanism: pitting and crevice attack were understood as local breakdown of the passive film, often at a critical chloride potential.
Localized Corrosion Science influenced by Passivation
Passivation theory supplied the concept of a protective oxide film whose local failure defines pitting and crevice corrosion, the core of localized corrosion science.
Localized Corrosion Science grew out of Localized Corrosion and Stress Corrosion Cracking
Localized corrosion science developed as a branch of the mid-century study of pitting, crevice and galvanic attack, refining the mechanisms of film breakdown and occluded cell chemistry.
Localized Corrosion Science influenced by Pourbaix diagram
Potential-pH diagrams gave localized corrosion researchers a thermodynamic map for predicting where a metal is passive, immune or dissolving, guiding interpretation of pitting and crevice potentials.
Carried by Marcel Pourbaix.
Polarization and Electrochemical Testing Methods influenced by Pourbaix diagram
Pourbaix's potential-pH framework and his electrochemical equilibrium methods shaped the interpretation of polarization measurements and the design of electrochemical tests.
Carried by Marcel Pourbaix.
Computational Corrosion Modeling and Life Prediction influenced by Polarization and Electrochemical Testing Methods
Computational corrosion models and life-prediction methods took their kinetic parameters and boundary conditions from electrochemical testing techniques such as polarization curves and impedance spectroscopy.
Computational Corrosion Modeling and Life Prediction influenced by Atmospheric and Environmental Corrosion Science
Predictive life models for infrastructure drew on the long-term atmospheric exposure data and corrosivity classifications built up by environmental corrosion science.
Tribocorrosion influenced by Environment-Assisted Cracking and Fracture Mechanics
Tribocorrosion research borrowed the fracture-mechanics and environment-assisted cracking view of mechanically driven degradation, applying it to wear-corrosion interactions.
Tribocorrosion influenced by Polarization and Electrochemical Testing Methods
Tribocorrosion studies used electrochemical testing methods, especially potentiostatic and impedance measurements, to separate the electrochemical and mechanical contributions to material loss.
Beyond the field
Where Corrosion And Degradation's ideas came from in other fields, and what they led to there: the strongest 12 of 48 links.
Electrochemical Corrosion Theory grew out of Electrolysis and electrochemical decomposition in Electrochemistry
Electrochemical corrosion theory was built directly on the electrolysis framework: corrosion was explained as local galvanic action in which anodic dissolution is coupled to cathodic reduction. This is the founding move of the field.
Pourbaix diagram grew out of Chemical Thermodynamics of Heterogeneous Equilibrium in Materials Thermodynamics And Phase Transformations
Pourbaix diagrams are chemical thermodynamics of heterogeneous aqueous equilibria, computing which solid oxide or hydroxide phases coexist with dissolved ions at given potential and pH. The method is a direct application of Gibbsian equilibrium thermodynamics to corrosion systems.
Carried by Marcel Pourbaix; J. Willard Gibbs.
Pourbaix diagram grew out of Electrochemistry in Physical Chemistry
The Pourbaix diagram is a branch of electrochemistry: it applies the Nernst equation and electrode potential measurements to map equilibrium states of metals in aqueous solution. Pourbaix built directly on the electrochemical potential concept developed by Nernst and others.
Carried by Marcel Pourbaix.
Pourbaix diagram grew out of Electrochemical thermodynamics in Electrochemistry
Pourbaix diagrams are electrochemical thermodynamics applied to metal-water systems, combining the Nernst equation with free-energy data for oxides and ions. The framework grew directly out of the electrochemical thermodynamics tradition.
Carried by Marcel Pourbaix.
Environment-Assisted Cracking and Fracture Mechanics grew out of Fracture mechanics and damage tolerance in Structural Materials
Environment-assisted cracking research adopted linear elastic fracture mechanics, using stress intensity factors to characterise crack growth under corrosive conditions. The damage-tolerance framework supplied the crack-tip parameter that EAC testing and prediction rely on.
Carried by George R. Irwin.
Environment-Assisted Cracking and Fracture Mechanics grew out of Fracture Mechanics in Solid Mechanics
Environment-assisted cracking applies solid mechanics fracture theory, using stress intensity factors and crack-tip fields to describe environmentally driven crack advance. It is a direct extension of the solid mechanics fracture framework.
Environment-Assisted Cracking and Fracture Mechanics grew out of Fracture Mechanics in Mechanical Behavior Of Materials
Environment-assisted cracking is a branch of fracture mechanics applied to materials under corrosive or hydrogen environments, using the same stress-intensity and crack-growth framework. The later field grew directly out of fracture mechanics.
Localized Corrosion Science grew out of Electrode kinetics in Electrochemistry
Localized corrosion science rests on electrode kinetics: pitting and crevice models use anodic dissolution kinetics, passivity breakdown and mixed-potential theory. The later field grew directly out of the electrode kinetics tradition.
Polarization and Electrochemical Testing Methods grew out of Electrochemistry in Physical Chemistry
Polarisation and electrochemical testing methods are a branch of electrochemistry, applying its electrode potential and current concepts to measure corrosion behaviour. The later methods grew directly out of the electrochemical tradition.
Polarization and Electrochemical Testing Methods grew out of Electrode kinetics in Electrochemistry
Polarisation testing methods are applied electrode kinetics: they measure current-potential curves and use Tafel and mixed-potential analysis to derive corrosion rates. The later methods grew directly out of electrode kinetics.
Tribocorrosion grew out of Contact Mechanics in Solid Mechanics
Tribocorrosion grew directly out of contact mechanics: it combines Hertzian contact and wear analysis with electrochemical dissolution at sliding contacts. The later field is a branch applying contact mechanics to corrosive wear.
Passivation influenced by Electrolysis and electrochemical decomposition in Electrochemistry
Passivation was understood through electrolysis: Faraday's 1836 work showed that iron in nitric acid becomes passive by acquiring a thin oxide film, an electrochemical explanation built on electrolysis concepts.
Carried by Michael Faraday.

Corrosion And Degradation is a planet in Nousfarer
Its city has a tower for each of these 12 frameworks. Land, walk in, and climb one concept at a time.
Land on Corrosion And DegradationRelated fields
Fields its ideas are linked to
- Electrochemistry 15 links
- Structural Materials 5 links
- Solid Mechanics 5 links
- Reliability Engineering 3 links
- Mechanical Behavior Of Materials 3 links
- Analytical Chemistry 2 links
- Physical Chemistry 2 links
- Materials Thermodynamics And Phase Transformations 2 links
- Metallurgy 2 links
- Mechanical Engineering 2 links
- Structural Geology And Tectonics 1 link
- Environmental Chemistry 1 link
More in Materials Science
- Biomaterials
- Ceramic Materials
- Composite Materials
- Computational Materials Science
- Electronic And Magnetic Materials
- Energy Materials
- Materials Characterization
- Materials Processing
- Materials Science
- Materials Thermodynamics And Phase Transformations
- Mechanical Behavior Of Materials
- Metallurgy
- Nanomaterials
- Polymer Science
- Quantum Materials
- Semiconductor Materials
- Structural Materials
See where Corrosion And Degradation sits on the Map of Human Knowledge