Quantum Materials

Quantum materials are solids whose behaviour cannot be explained by treating their electrons as independent particles drifting through a fixed lattice.

11 frameworks, from 1928 to today · Materials Science · Natural Sciences

still a working view ended · each leads to its entry below

Overview

Quantum materials are solids whose behaviour cannot be explained by treating their electrons as independent particles drifting through a fixed lattice1. In an ordinary metal or semiconductor, band theory—the picture in which each electron occupies a state in a shared energy landscape, largely ignoring the others—works well enough to predict conductivity, optical gaps, and heat capacity2. Quantum materials are the exceptions: systems where electrons interact so strongly with one another, or where their quantum-mechanical phase is so delicately entangled across the whole crystal, that the collective behaviour is qualitatively new1. Superconductors that carry current without resistance, magnets whose spins refuse to order even at absolute zero, and materials whose surfaces conduct while their interiors insulate are all products of this regime34. The field matters because these behaviours are both scientifically deep—they are among the clearest windows onto quantum many-body physics—and technologically promising, from lossless power transmission to fault-tolerant quantum computing.

Band Theory and Its Limits (1900–1950s)

The story begins with the quantum theory of solids. In the late 1920s, Felix Bloch and Alan Wilson developed the band theory of solids: electrons in a periodic crystal occupy allowed energy bands separated by forbidden gaps. A material with a partially filled band conducts; one with a full band separated from the next by a gap insulates2. This framework, refined through the 1930s, explained metals, insulators, and semiconductors with striking economy. It treated electron–electron interactions as a minor correction—a reasonable approximation for many simple metals.

The first major crack appeared in superconductivity. In 1911, Heike Kamerlingh Onnes found that mercury loses all electrical resistance below about 4 K. Band theory had no account of this56. Through the 1930s and 1940s, phenomenological descriptions emerged. The Ginzburg–Landau theory (1950) described the superconducting state with an order parameter—a complex field whose magnitude measures how many electrons have paired—and predicted two length scales governing how the state responds to magnetic fields and perturbations. It was enormously successful as a description but said nothing about the microscopic mechanism.

BCS and the Pairing Idea (1957)

The microscopic explanation came in 1957, when John Bardeen, Leon Cooper, and Robert Schrieffer showed that electrons near the Fermi surface can bind into pairs through a subtle attraction mediated by lattice vibrations (phonons). In the BCS theory, these Cooper pairs condense into a single quantum state, and the energy gap that opens at the Fermi surface explains both zero resistance and the Meissner effect5. The theory's central insight—that a weak attractive interaction can produce a robust collective quantum state—became a template for thinking about quantum materials generally.

BCS worked spectacularly for simple metals. But in 1986, Georg Bednorz and Alex Müller discovered superconductivity in a copper-oxide ceramic (a cuprate) at temperatures far above what phonon-mediated pairing could explain. The cuprates launched the modern study of unconventional superconductivity: superconductors whose pairing mechanism is not simple electron–phonon coupling, and whose normal state is itself strange. In the cuprates, the "normal" state above the transition temperature behaves not like an ordinary metal but like a "strange metal" whose resistivity scales linearly with temperature over a wide range—a signature of strong correlations that band theory cannot capture7.

Strong Correlations and the Mott Problem (1960s–1980s)

The conceptual foundation for understanding such systems had been laid earlier. In the 1930s and 1940s, Nevill Mott and others recognised that electrons in narrow bands can localise because of their mutual repulsion, turning a material that band theory predicts to be a metal into an insulator—the Mott insulator8. The Hubbard model, introduced in the 1960s, distilled this physics into a lattice of sites with a hopping term and an on-site repulsion9. It remains the canonical model of strongly correlated electron systems, and solving it in two dimensions is still an open problem.

The 1980s brought a second shock: the discovery of high-temperature superconductivity in the cuprates forced the field to confront a system where strong correlations, magnetism, and superconductivity coexist and compete1011. The resonating valence bond idea, proposed by Philip Anderson in 1987, suggested that the cuprate normal state might be a quantum spin liquid—a state in which spins remain disordered and entangled down to zero temperature, never freezing into a conventional magnet412. Whether this is the correct description of the cuprates remains debated, but the concept of the quantum spin liquid became a major research target in its own right, with candidate materials identified from the 2000s onward.

The Quantum Hall Effects (1980–1990s)

A parallel revolution came from two-dimensional electron gases in strong magnetic fields. In 1980, Klaus von Klitzing found that the Hall conductance of such a system is quantised in exact integer multiples of e²/h—the integer quantum Hall effect—a result so precise it now defines resistance standards. The quantisation arises from topological properties of the electron wavefunctions, not from material details.

In 1982, Daniel Tsui, Horst Störmer, and Arthur Gossard observed the fractional quantum Hall effect: at certain filling fractions, the Hall conductance takes fractional values1314. Robert Laughlin's 1983 theory explained this through a correlated many-body wavefunction in which quasiparticles carrying fractions of an electron charge emerge. The fractional quantum Hall state is the archetypal topologically ordered phase—a state with no local order parameter but with robust, non-local quantum entanglement15. Its excitations, anyons, obey statistics neither fermionic nor bosonic, and are now pursued as building blocks for topological quantum computation.

Topological Band Theory (1980s–2000s)

The quantum Hall effects inspired a broader programme: classifying band structures by topology. In 1988, Duncan Haldane proposed a model showing that a honeycomb lattice with complex hopping could exhibit a quantum Hall effect without net magnetic field. The general framework crystallised in the 2000s. In 2005, Charles Kane and Eugene Mele showed that spin–orbit coupling in graphene-like systems could produce a topological insulator—a material insulating in the bulk but conducting on its edges, with the edge states protected by time-reversal symmetry. The following years saw the prediction and discovery of three-dimensional topological insulators (notably bismuth selenide and related compounds), Weyl semimetals, and a menagerie of topological phases classified by symmetry and dimension.

The key idea is that certain band structures carry a topological invariant—a number that cannot change unless the band gap closes. Materials with different invariants must have metallic states at their boundaries. This made topology a design principle: one could predict new materials by computing invariants from band theory, then look for the protected surface states.

Dynamical Mean-Field Theory and Computational Strong Correlations (1990s–2000s)

While topology flourished, the strong-correlation problem needed computational tools. In 1989, Antoine Georges and Gabriel Kotliar introduced dynamical mean-field theory (DMFT), which maps a lattice of correlated electrons onto a single impurity embedded in a self-consistent bath. Unlike earlier mean-field approaches, DMFT retains the local quantum dynamics—the frequency dependence of electron self-energy—and captures the Mott transition. Combined with density functional theory (DFT+DMFT) from the 2000s, it became a workhorse for predicting and interpreting strongly correlated materials, from transition-metal oxides to heavy-fermion compounds.

Moiré Materials (2010s–Present)

The most recent turning point came from an unexpected direction: stacking two-dimensional crystals. When graphene is placed on another graphene layer with a slight twist angle, the interference of the two lattices creates a moiré pattern—a long-wavelength superlattice. In 2011, theorists predicted that such twisted bilayers could host flat bands, where electrons move slowly and interactions dominate. In 2018, Pablo Jarillo-Herrero's group showed that magic-angle twisted bilayer graphene (twist near 1.1°) becomes a superconductor and a correlated insulator depending on doping. The result ignited the field of moiré materials, where twist angle and layer stacking become tunable knobs for engineering strong correlations and topology in a single device.

The Present

Quantum materials research today is a convergence zone. Topological band theory and strong-correlation methods are increasingly combined: topological Kondo insulators, correlated topological phases, and the search for Majorana modes in hybrid superconductor–semiconductor devices all sit at the intersection. Moiré systems provide a highly tunable platform for testing ideas about unconventional superconductivity and quantum spin liquids. DMFT and its cluster extensions remain central for materials-specific prediction, while tensor-network and quantum Monte Carlo methods push into regimes once thought inaccessible. The open questions are substantial: the pairing mechanism in cuprates and other unconventional superconductors, whether quantum spin liquids exist in real materials and how to prove it, how to control topological excitations for quantum computing, and how to predict new quantum phases from first principles rather than discovering them by accident. The field's history is one of repeated shocks—superconductivity, the quantum Hall effects, the cuprates, topological insulators, moiré flat bands—each revealing that electrons in solids can organise into states far richer than the independent-particle picture ever suggested.

References

  1. Quantum materials, Wikipedia
  2. Electronic band structure, Wikipedia
  3. Topological insulator, Wikipedia
  4. Quantum spin liquid, Wikipedia
  5. BCS theory (History, introduction), Wikipedia
  6. Superconductivity (introduction, History), Wikipedia
  7. Fermi liquid theory (Non-Fermi liquids), Wikipedia
  8. Mott insulator (introduction, History), Wikipedia
  9. Hubbard model (introduction, History), Wikipedia
  10. Unconventional superconductor (History), Wikipedia
  11. High-temperature superconductivity, Wikipedia
  12. Resonating valence bond theory, Wikipedia
  13. Fractional quantum Hall effect (History and developments), Wikipedia
  14. Anyon (History), Wikipedia
  15. Topological order, Wikipedia

The frameworks of Quantum Materials

Each framework is a way of working the field has used: when it held, and the question it answers.

  1. 1928-Present

    Electronic band structure

    How do electrons occupy energy bands in a crystal?

    Fly to its tower in Nousfarer

  2. 1950-Present

    Ginzburg–Landau theory

    How can an order parameter describe a superconductor?

    Fly to its tower in Nousfarer

  3. 1957-Present

    BCS theory

    Why do electrons pair to carry current without resistance?

    Fly to its tower in Nousfarer

  4. 1963-Present

    Strongly correlated material

    Why do strongly repelling electrons sometimes fail to conduct?

    Fly to its tower in Nousfarer

  5. 1980-Present

    Quantum Hall effects

    Why is Hall conductance quantised in two dimensions?

    Fly to its tower in Nousfarer

  6. 1982-Present

    Fractional quantum Hall physics

    How do quasiparticles with fractional charge arise?

    Fly to its tower in Nousfarer

  7. 1986-Present

    Unconventional superconductor

    What pairs electrons when phonons cannot explain it?

    Fly to its tower in Nousfarer

  8. 1987-Present

    Quantum spin liquids and resonating valence bonds

    Why do some spins never order even at zero temperature?

    Fly to its tower in Nousfarer

  9. 1989-Present

    Dynamical mean-field theory

    How can a lattice of correlated electrons be computed?

    Fly to its tower in Nousfarer

  10. 2005-Present

    Topological band theory

    Which band structures carry a topological invariant?

    Fly to its tower in Nousfarer

  11. 2018-Present

    Moiré materials

    How does twisting two layers create flat bands?

    Fly to its tower in Nousfarer

How the ideas connect

Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.

Electronic band structureGinzburg–Landau theoryBCS theoryStrongly correlated materialQuantum Hall effectsFractional quantum Hall physicsUnconventional superconductorQuantum spin liquids and resonating v…Dynamical mean-field theoryTopological band theoryMoiré materials

Beyond the field

Where Quantum Materials's ideas came from in other fields, and what they led to there: the strongest 12 of 39 links.

A city in Nousfarer: a red-carpeted stair climbing terraces to a crowned tower on an acropolis, more towers round it, forest and snowy mountains beyond.
A city in Nousfarer, the game played in the browser.

Quantum Materials is a planet in Nousfarer

Its city has a tower for each of these 11 frameworks. Land, walk in, and climb one concept at a time.

Land on Quantum Materials

Related fields

Fields its ideas are linked to

More in Materials Science

See where Quantum Materials sits on the Map of Human Knowledge