Environmental Design

Environmental design is the branch of architecture that treats a building's setting, climate, occupants, and resource flows as design problems in their own right—not as afterthoughts to form-making.

9 frameworks, from 1950 to today · Architecture · Arts & Architecture

still a working view ended · each leads to its entry below

Overview

Environmental design is the branch of architecture that treats a building's setting, climate, occupants, and resource flows as design problems in their own right—not as afterthoughts to form-making1. Where a purely compositional architect asks what a building should look like, the environmental designer asks how it will behave: how sun and wind will move through it, how much energy it will consume, how its occupants will feel, and what it will cost the wider environment over its life. The field's history is the story of how those questions moved from the margins of architectural practice to its center, and of the tools—scientific, psychological, and regulatory—that made them answerable.

Climate as a Design Determinant: The Bioclimatic Tradition

Long before "environmental design" had a name, builders shaped buildings around climate1. The courtyard houses of hot-arid regions, the deep verandas of tropical colonial architecture, and the thick masonry walls of temperate zones all encode accumulated knowledge about sun, wind, and thermal mass. What changed in the twentieth century was the attempt to make this knowledge systematic and predictive.

The Hungarian-born architect and engineer Olgyay brothers—Victor and Aladar—gave the field one of its founding texts, Design with Climate, published in 1963. Victor Olgyay's contribution was a method: the "bioclimatic chart," a diagram that plotted temperature and humidity against the comfort zone of the human body and then indicated which architectural strategies—shading, ventilation, evaporative cooling, thermal mass—could bring a given climate into comfort without mechanical systems. The chart made climate legible as a design variable. It also embodied a claim that would recur throughout the field's history: that a building tuned to its climate could reduce or eliminate its dependence on fossil-fuel heating and cooling.

The bioclimatic approach was taken up and extended by later designers and researchers, notably Baruch Givoni, whose work on passive cooling and the "building bio-climatic chart" refined the method for hot climates. In the 1970s, the oil crises gave bioclimatic design a new urgency and a new audience, and it became a strand within the broader "passive solar" movement that flourished in the United States and Europe.

The Design Methods Movement and the Dream of a Science of Design

In the 1960s, a parallel development reshaped how designers thought about their own process. The Design Methods Movement emerged from conferences and publications—most visibly the 1962 "Conference on Design Methods" in London and the 1965 book Design Methods by J. Christopher Jones—and from the work of figures such as Christopher Alexander, Horst Rittel, and Bruce Archer. The movement's premise was that design could be made more rigorous by borrowing techniques from operations research, systems analysis, and computer science: problem decomposition, systematic evaluation, and explicit criteria.

For environmental design, the movement mattered because it supplied the intellectual scaffolding for treating buildings as systems to be optimized rather than compositions to be intuited. Alexander's Notes on the Synthesis of Form (1964) proposed that design problems could be decomposed into sub-problems whose interactions could be mapped and resolved—an idea that resonated with the emerging ambition to compute building performance. Rittel's later work on "wicked problems" (problems with no definitive formulation or stopping rule) was in part a reaction against the movement's early optimism, and it remains a cautionary counterpoint in the field.

The movement's influence on environmental design was double-edged. It legitimized systematic analysis, but its more technocratic wing was criticized for treating human needs as inputs to be quantified. That tension—between the measurable and the lived—would define much of the field's subsequent history.

Environmental Psychology and the Occupant as a Design Criterion

If bioclimatic design addressed the building's physical environment, a new discipline addressed its human one. Environmental psychology emerged in the 1960s and 1970s, largely in North America, as the study of how people perceive, use, and are affected by their surroundings. Its founding figures included Harold Proshansky and William Ittelson, whose edited volume Environmental Psychology: Man and His Physical Setting (1970) helped define the field, and Robert Sommer, whose Personal Space (1969) introduced the concept of the "personal bubble" and the study of spatial behavior.

For architects, the most consequential contribution was the demonstration that design decisions have measurable psychological effects—on crowding, privacy, wayfinding, and social interaction. Oscar Newman's Defensible Space (1972) argued that the physical layout of public housing could either support or undermine residents' sense of territorial control, and it linked that argument to crime rates. The claim was contested, but it established a template: design could be evaluated against social outcomes, not just aesthetic ones.

This strand fed directly into post-occupancy evaluation (POE)—the systematic study of buildings after they are occupied, measuring whether they perform as intended for the people who use them2. POE developed through the 1970s and 1980s in government and academic research, notably in the work of Wolfgang Preiser and colleagues, whose Post-Occupancy Evaluation (1988) codified the method. POE gave environmental design a feedback loop: buildings could be studied, their failures diagnosed, and the lessons fed back into design. It also exposed how often buildings failed their occupants—too hot, too cold, too noisy, too confusing—and thus became an argument for treating performance as a design responsibility.

Building Performance Simulation: Making the Invisible Calculable

The ambition to predict building behavior before construction drove the development of building performance simulation—computer programs that model energy use, thermal comfort, daylight, and airflow3. The lineage runs back to the 1960s and 1970s, when mainframe computers first made it possible to solve the heat-balance equations of a building. Early tools such as NBSLD (National Bureau of Standards Load Determination), developed in the early 1970s by Tamami Kusuda and colleagues, and the CALPAS and DEROB programs, established the basic approach: represent the building as a network of thermal resistances and capacitances, drive it with weather data, and compute hourly loads.

The oil crises accelerated this work, and by the 1980s tools such as DOE-2 (developed at Lawrence Berkeley Laboratory) and ESP (in the UK) were in use for code compliance and design analysis. The 1990s and 2000s brought graphical interfaces, integration with CAD, and whole-building energy modeling as a routine service. Simulation changed the designer's relationship to performance: instead of relying on rules of thumb, a designer could test alternatives—orientation, glazing ratio, shading, insulation—and see the consequences numerically. It also created a new professional role, the energy modeler, and a new set of disputes about how much simulation could be trusted.

Green Building and the Rise of Rating Systems

By the 1990s, environmental design had acquired a public face: green building4. The term gathered under one banner a range of concerns—energy efficiency, water conservation, materials, indoor air quality, site ecology—and, crucially, it produced rating systems that made "green" measurable and marketable.

The most influential was LEED (Leadership in Energy and Environmental Design), launched by the U.S. Green Building Council in 1998 (with a pilot version in 1998 and the first full version in 2000). LEED awarded points across categories such as sustainable sites, water efficiency, energy and atmosphere, materials and resources, and indoor environmental quality, and certified buildings at levels from Certified to Platinum. Its success was rapid and global, and it spawned siblings and competitors: BREEAM in the UK (developed by the Building Research Establishment, first launched in 1990), Green Star in Australia, and national systems elsewhere56.

Rating systems were a turning point because they changed the incentive structure of the building industry. They gave clients a way to specify and verify environmental performance, gave designers a checklist, and gave the market a label. They were also criticized—for rewarding point-chasing over real performance, for favoring certain technologies, and for being calibrated to wealthy markets7. The debate over whether rating systems measure outcomes or merely intentions remains live7.

Biophilia and the Health Turn

A further strand emerged from the observation that human well-being depends on more than thermal comfort and energy efficiency. Biophilic design—the idea that contact with nature is a basic human need and should be designed into buildings—was popularized by Stephen Kellert and Judith Heerwagen, building on E. O. Wilson's "biophilia hypothesis" (1984)8. The claim was that views of greenery, daylight, natural materials, and patterns found in nature reduce stress and improve cognitive performance. The evidence base grew through the 2000s and 2010s, and biophilic principles entered mainstream practice through frameworks such as the WELL Building Standard (launched 2014), which shifted attention from the building's resource flows to its occupants' health.

This "health and well-being" turn is the most recent major reframing of environmental design. It descends from environmental psychology and POE, but it has broadened the field's mandate: a building is now judged not only by its energy use but by its effects on the people inside it—air quality, light, acoustics, thermal comfort, and psychological restoration.

The Present: Integration and Open Questions

Today environmental design is less a separate specialty than a set of expectations folded into mainstream architectural practice. Energy modeling is routine on larger projects; green certification is a market norm in many countries; post-occupancy evaluation, though still unevenly practiced, is embedded in professional standards and in the research culture of architecture schools. The field's academic umbrella—programs and journals that combine building science, environmental psychology, and sustainable design—descends from the strands traced above.

The open questions are the ones its history kept raising. How reliable are simulation predictions, and how should designers handle uncertainty? Do rating systems reward real performance or symbolic compliance7? Can bioclimatic and passive strategies be reconciled with the comfort expectations and density of contemporary cities? And how does the field's commitment to measurable performance coexist with the qualitative, lived experience that environmental psychology and biophilia insist on? These are not new questions; they are the field's founding tensions, still unresolved.

References

  1. Environmental design (introduction, History), Wikipedia
  2. Post-occupancy evaluation, Wikipedia
  3. Building performance simulation, Wikipedia
  4. Green building, Wikipedia
  5. BREEAM (introduction, History), Wikipedia
  6. Green Star (Australia), Wikipedia
  7. LEED, Wikipedia
  8. Biophilia hypothesis, Wikipedia

The frameworks of Environmental Design

Each framework is a way of working the field has used: when it held, and the question it answers.

  1. 1950-Present

    Bioclimatic Design

    How can climate shape comfortable buildings?

    Fly to its tower in Nousfarer

  2. 1959-Present

    Environmental Design as an Academic Umbrella

    How do setting, climate and occupants shape design?

    Fly to its tower in Nousfarer

  3. 1962-1980

    Design methods

    Can design be made a rigorous method?

    Fly to its tower in Nousfarer

  4. 1968-Present

    Environmental Psychology

    How do surroundings affect people's behavior and feelings?

    Fly to its tower in Nousfarer

  5. 1970-Present

    Building Performance Simulation

    How can a building's performance be predicted before construction?

    Fly to its tower in Nousfarer

  6. 1975-Present

    Post-Occupancy Evaluation

    Do buildings work as intended for their users?

    Fly to its tower in Nousfarer

  7. 1990-Present

    Green Building Rating Systems

    How can environmental performance be measured and rewarded?

    Fly to its tower in Nousfarer

  8. 2005-Present

    Biophilic Design

    Why do people need nature in their surroundings?

    Fly to its tower in Nousfarer

  9. 2014-Present

    Health and Well-being Design

    How can buildings support human health and well-being?

    Fly to its tower in Nousfarer

How the ideas connect

Each arrow runs from an earlier idea to the later one it shaped. The list below says what passed between them.

Bioclimatic DesignEnvironmental Design as an Academic U…Design methodsEnvironmental PsychologyBuilding Performance SimulationPost-Occupancy EvaluationGreen Building Rating SystemsBiophilic DesignHealth and Well-being Design

Beyond the field

Where Environmental Design's ideas came from in other fields, and what they led to there: the strongest 12 of 26 links.

A city in Nousfarer: a red-carpeted stair climbing terraces to a crowned tower on an acropolis, more towers round it, forest and snowy mountains beyond.
A city in Nousfarer, the game played in the browser.

Environmental Design is a planet in Nousfarer

Its city has a tower for each of these 9 frameworks. Land, walk in, and climb one concept at a time.

Land on Environmental Design

Related fields

Fields its ideas are linked to

More in Architecture

See where Environmental Design sits on the Map of Human Knowledge